Subscribe to Our Youtube Channel
Related Manuals for skyvoe Fusion Series
Summary of Contents for skyvoe Fusion Series
- Page 1 Fusion Series Owner’s Manual Full Shade Weatherproof Televisions IMPORTANT: Please read this owners manual before starting or operating the equipment. 2160P...
-
Page 3: Table Of Contents
Table of Contents Safety Information ..................3 General Information ..................6 Rear Panel Component Source ..................7 Rear Panel Connections ....................8 Wall Mounting ........................9 Remote Control Guide ....................11 On Screen Menu & Settings ..................12 Picture Settings ......................15 Audio Settings ....................... -
Page 5: Safety Information
Safety & Certification Thank You For Choosing Skyvue To get the most out of your new SkyVue product, read these instructions before using your product and retain them for future reference. Prior to installation (this includes optional speaker bar, mounting arms, or any cables);... - Page 6 electric shock, and other hazards. If repair is required, and no objects filled with liquids, such as vases, shall be • Ensu contact your dealer and refer all servicing to qualified service placed on the apparatus. the s personnel. • The mains plug or appliance coupler is used as the disconnect •...
- Page 7 Television Antenna Connection Protection If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes,...
- Page 8 tp://patents.dts.com. For DTS patents, see http://patents.dts.com. e from DTS, Inc. DTS, the Manufactured under license from DTS, Inc. DTS, the Manufactured under license from Dolby Laboratories. Manufactured under license l together, and DTS Studio symbol, DTS and the Symbol together, and DTS Studio Dolby, Dolby Audio, and the double-D symbol are Dolby, Dolby Audio, and emarks and/or trademarks...
-
Page 9: General Information
Rear Panel Component Source WARNING: Do not connect the power source before making connections. Internal Component Source The Internal Component Source allows you to easily connect to the Audio, Video, Digital Audio Out, HDMI, Audio Out, and RF connectors. 1. The Internal Component Source is inside the Component Cover located on the back of the unit. 2. -
Page 10: Rear Panel Connections
Rear Panel Connections Rear Panel Connections 43” 50” 55” TV’s AUDIO OUT 1. USB: Connect a USB thumb drive to play photo, music, or video. HDMI 2 HDMI 1 DIGITAL 2. Component: Connect a component. AV AUDIO AV AUDIO ETHERNET AUDIO OUT CABLE/SAT (BEST) -
Page 11: Wall Mounting
Wall Mounting Information Wall-Mounting The Tv To mount your TV on a wall, you will need a wall mount. Consult the information on this page to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. - Page 12 Connecting the Power Cord WARNING: TV and AC receptacle must be installed at least 5 feet away from standing water, such as (but not limited to) a pool or spa. Please allow for additional clearance if TV is in use on a SkyVue Portable Cart.
-
Page 13: Remote Control Guide
Remote Control Guide POWER - Switch the TV power on or enter standby. TV - Push to control TV Learn - Push to teach remote features DVD - Push to control DVD player Satellite - Push to control the satellite receiver Cable - Push to control functions of the cable box Input - Push to change the viewing source on the television View Mode - Push to change format of the screen... -
Page 14: On Screen Menu & Settings
Using the On-Screen Menu Using The On-Screen Menu Your TV features an easy-to-use on-screen menu. Navigating The On-Screen Menu To open the on-screen menu, press the Menu button on the remote. To op Your TV features an easy-to-use on-screen menu. To open the the M From this menu, you can: on-screen menu, press the Menu button on the remote. - Page 15 Changing The Screen Aspect Ratio The TV can display images in four different modes: Normal, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Some programs have black bars on the top or sides of the picture so that the picture keeps its orig- inal shape.
- Page 16 Adjusting The Picture Settings Your TV can be adjusted to suit your preferences and viewing conditions. To adjust the picture settings: 1. Press the Menu button on the remote. The on-screen menu is displayed. RE SETTINGS 3. Use the Arrow buttons on the 4.
-
Page 17: Picture Settings
Adjusting The Picture Settings (continued) • Color - Adjusts the intensity of the picture colors. • Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint. •... - Page 18 Adjusting More Picture Settings (continued) • Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise • Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content.
- Page 19 Auto Brightness Control Lock Picture Mode displayed. Reset Picture Mode - Calibrated Backlight 2. Use the Arrow buttons to Brightness highlight the setting you wish to Contrast adjust, then press OK to change Color Adjusting the Picture Mode Edit Settings the setting: Tint 2.
- Page 20 Locking/Unlocking a Custom Picture Mode Locking/Unlocking a Custom Picture Mode you to save a group of custom settings Custom picture modes can be locked/unlocked with a unique PIN to s and video sources. prevent accidental changes to their settings. Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. n any preset picture mode will add an To lock all custom picture modes: To lock all custom picture modes:...
- Page 21 use the Arrow buttons to highlight To delete the user created Custom 1 picture mode, Delete Picture Mode, and then select the Delete button. press OK. The DELETE PICTURE Delete Cancel MODE window is displayed. 2. Use the Left/Right Arrow buttons to highlight Delete and press Resetting a Picture Mode 3.
- Page 22 Adjusting the Color Tuner Settings (continued) To turn color channels off and on: To adjust the 11 Point White Balance To turn color channels off and on: 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. From the Color Tuner menu, use 1.
- Page 23 Adjusting the Color Tuner Settings (continued) To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Patt To show or hide the SMPTE Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to 1.
- Page 24 Adjusting the Color Tuner Settings (continued) To show or hide the Uniformity Analyzer Test Pattern: To show or hide the Uniformity Analyzer Test Pattern: 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. From the COLOR CALIBRATION menu, use the Arrow buttons to highlight Calibration Tests, to highlight Calibration Tests, and then press the Left/Right and then press the Left/Right Arrow buttons until the UNIFORMITY ANALYZER TEST PATTERN Arrow buttons until the UNIFORMITY ANALYZER TEST PATTERN...
-
Page 25: Audio Settings
Adjusting The Audio Settings Adjusting the Audio ADJUSTING THE AUDIO SETTINGS • To adjust the audio settings: To adjust the audio settings: • 1. Press the Menu button on the remote. The on-screen menu Audio Back is displayed. 1. Press the Menu button on the Speakers Auto •... -
Page 26: Network Settings
1. From If your TV is connected to a network with an Ethernet highli cable, you will not see the wireless network connection OK. T Adjusting The Network Settings menu. You must unplug the Ethernet cable to set a displa wireless network connection. - Page 27 Changing the Manual Setup Settings (continued) • Pref. DNS Server - Your preferred domain name server address. • Alt. DNS Server - Your alternate domain name server address. 4. Use the Arrow buttons on the remote to highlight Save and press OK. 5.
- Page 28 Testing Your Network Connection To test your network connection: 1. From the NETWORK menu, highlight Test Connection and press OK. 2. The TEST CONNECTION screen displays the connection method, network name, signal strength, and download speed of your network connection. 3.
-
Page 29: Timer Settings
Setting Timers SETTING TIMERS Sett Setting the Timer To h 10 m Setting the Timer deac When activated, the TV’s timer will turn the TV off after a set period of time. When activated, the TV’s timer will turn the TV off after a set period of time. -
Page 30: Channel Setup
Setting Up Channels SETTING UP CHANNELS The Channels Menu You can use the TV’s Channels menu to: • Find Channels You can use the TV’s Channels menu to: Channels • Select channels to skip Back Scanning for Channels Skip • Find Channels •... -
Page 31: Listening To Alternate Audio
2. S Secondary Audio Programming (SAP). Not all programs are broadcast in SAP. The Analog Listening To Alternate Audio Audio Language feature only works when the program 3. P being viewed is being broadcast with Secondary Audio Changing the Analog Audio Language Programming. -
Page 32: Parental Controls
Parental Controls Using Parental Controls The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. The Parental Controls menu only appears when: You are using the tuner to receive your TV signals, such as when you are using an antenna for Over- the-Air signals or when connected to cable TV directly from the wall (no cable box). - Page 33 1. From the PARENTAL CONTROLS menu, highlight Locks and programs from being viewed. When this is the case, you can use t press OK. The LOCKS menu is displayed. 1. From the PARENTAL CONTROLS menu, highlight Locks and block content based on its rating. When this is the case, you can use press OK.
-
Page 34: Setting Up Closed Captioning
Closed captions display a transcription of a program’s dialogue. If the program you are viewing is not being broadcast Setting Up Closed Captioning with closed captions, the TV will not display them. Closed Captioning Settings The Closed Captions menu does not appear when an HDMI input is selected. - Page 35 ted. 2. Use the Left/Right Arrow Digital Style Back buttons on the remote to select Custom. The DIGITAL STYLE Text Style As Broadcast ed captions: menu appears as shown. Test Size Large n the Changing the Appearance of Digital Closed Captions (continued) Text Color Blue 3.
-
Page 36: Renaming Devices
Renaming Devices On The Input Menu Renaming Input Devices You can rename the inputs to make them easier to recognize on the INPUT menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.”... -
Page 37: Changing The Tv Settings
Changing The Tv Settings System Menu CHANGING THE TV SETTINGS Using the SYSTEM menu, you can: Using the SYSTEM menu, you can: • Check for updates • Check for updates System Back • View system information • View system information Check for Updates •... - Page 38 Setting the Time and Local Settings Setting the Time and Local Settings To ensure the correct time is displayed when you press the Info To ensure the correct time is displayed when you press the Info button, set the TV’s time zone: button, set the TV’s time zone: 1.
- Page 39 Turning the Power Indicator On or Off The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on. To turn the Power Indicator Light On or Off: 1.
-
Page 40: Accessibility Settings
Accessibility Settings The Accessibility Menu ACCESSIBILITY SETTINGS USING VIZIO is committed to providing intuitive, user-friendly You can Your new TV offers several accessibility features that can help you get the most out of it. products. Your new VIZIO TV offers several accessibility factory To access the ACCESSIBILITY menu: features that can help you get the most out of it. -
Page 41: Reset & Admin Menu
Using The Reset & Admin Menu The Reset & Admin Menu USING THE RESET & ADMIN MENU ding intuitive, user-friendly You can use the TV’s RESET & ADMIN menu to restore the TV to its V offers several accessibility You can use the TV’s RESET & ADMIN menu to restore the TV to its factory default settings as well as factory default settings as well as access other system settings. -
Page 42: First Time Setup / Setup After Factory Reset
Setup After Factory Reset Completing Setup after factory reset Setup After Factory Reset The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use. The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to Before you begin the setup: Before you begin the first-time setup:... - Page 43 2. Choose home use. 3. Choose your country. 4. Choo Setup After Factory Reset (continued) SET SYSTEM PIN You can set a System Pin to use: 1. Picture mode lock 2. Parental controls 3. Reset to TV to factory default setting The first time you select System PIN code, you will e 6.
- Page 44 Using The Info Window The Info Window can be displayed by pressing the Info button on the remote: • Press the Info button one time to display the TV name, current input, picture mode, network name, and time. Current Input Picture Mode Network Name TV Name...
-
Page 45: Smartcast Tv
SmartCast TV™ What is Vizio SmartCast TV™? SmartCast TV lets you discover, stream, and control your content like never before. Access top apps like Netflix more easily, using the included remote to browse and launch content directly from the big screen. SmartCast TV makes finding something to watch more fun - discover new shows, including movies in 4K UHD. -
Page 46: Playing Usb Media
Playing USB Media USB Media You can connect a USB thumb drive to your TV to play videos. Preparing Your USB Drive to Play USB Media Removing the USB Drive from the To TV USB media, you must first save your videos onto a USB thumb To safely remove your USB drive from Preparing Your USB Drive to Play USB Media drive:... - Page 47 USB Media (continued) Now Playing Information displays song title, album title, and artist name. Back Button Album Art Highlight this button and Progress Bar If included on the USB press OK to return to displays the duration of the current- thumb drive and associated the previous screen.
- Page 48 USB Media (continued) Folder Contents This area displays the Back Button Back Button contents of the currently Highlight this button and Highlight and press OK to return to left column. selected folder. You can press OK to return to browse files and folders the previous screen.
-
Page 49: Help / Troubleshooting
Help Topics The remote is not responding • Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones. The TV displays “No Signal” • Press INPUT button on the remote control to select a different input source. •... - Page 50 The colors on the TV don’t look right • Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings. • Select a pre-set picture mode. See Adjusting the Picture, SKYVUE recommends selecting Calibrated. • Check all cables to ensure they are securely attached. The buttons on the remote aren’t working •...
- Page 51 I see “noise” or static on the screen • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low.
-
Page 52: Regulatory Information
How do I stream apps like Netflix and Youtube to my VIZIO SmartCast™ Display? • Download and open a Chromecast-enabled apps on your mobile device, such as like Netflix or Youtube. Then tap the Cast button. How do I exit Demo Mode •... - Page 53 FCC Warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Caution Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for each area. Canada Notice for License-Exempt Radio Apparatus This device complies with Industry Canada’s license-exempt RSSs.
-
Page 54: Legal Information
Legal Information Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at http://www.vizio.com/privacy. - Page 55 We at SKYVUE outdoor TV’s want to thank you for purchasing your new Fusion series SkyVue outdoor TV. SKYVUE will warranty any defect or failure from the manufacturing process according to the terms listed in the warranty section of our site: www.skyvue.com SKYVUE does not maintain or support any 3rd party software or apps that are preloaded or downloaded to the TV.
Need help?
Do you have a question about the Fusion Series and is the answer not in the manual?
Questions and answers