Summary of Contents for Dolphin DOLCSAW1000H
- Page 1 DOLCSAW1000H Reader USER MANUAL INSTRUCTIONAL VIDEO Quick Start Guide Installation and Wiring Connection Diagram Programming Guide...
-
Page 2: Specifications
The DOLCSAW1000H is a single door multifunction standalone access controller. FEATURES • Waterproof, conforms to IP66 • One relay, remote infrared programmer • 1,000 users (998 common users + 2 panic users) • Can be set to read EM card, HID card, or both •... - Page 3 Cards can be added continuously Delete User (READ CARD) For card user Exit from Programming Mode IN THE BOX Diode IN4004 (For relay circuit protection) DOLCSAW1000H Wall Anchors Self Tapping Screws Screw Driver Remote Control Master Add Card Master Delete Card...
- Page 4 Installation and Wiring • Remove the back cover from the unit • Drill 2 holes(A,C) on the wall for the screws and one hole for the cable • Knock the supplied rubber bungs to the screw holes(A,C) • Fix the back cover firmly on the wall with 4 flat head screws •...
-
Page 5: Sound And Light Indication
Wire Color Function Notes AC 1 (+DC) 12-24V AC Power Input, 12-24V DC Power Input Black Negative Pole of DC Power Input Pink 12-24V AC Power Input Blue Relay NO Normally Open Relay Output (install diode provided) Purple Relay Common Common Connection for Relay Output Orange Relay NC Normally Closed Relay Output (Install diode provided) -
Page 6: Dc Power Supply
Connection Diagram DC POWER SUPPLY Blue Orange Magnetic Lock or Fail-secure Fail-Safe lock Purple Lock Pink AC 1 DC +12～24V Exit Button Yellow OPEN DC Power Supply Brown D_ IN Door Contact Grey ALARM - DC Alarm Green White Black AC POWER SUPPLY Blue Orange... - Page 7 Programming PROGRAMMING BY INFRARED REMOTE CONTROL Programming will vary depending on access confirguration. Follow the instructions according to your access configuration. • User ID number: Assign a user ID to the access card in order to track it. The common user ID number can be any number fom 0~997, the panic user ID is from 998~999.
-
Page 8: Delete Users
ADD PANIC USERS Programming Step Keystroke Combination Enter Programming Mode Master Code Add Card User ID* (Read Card/Input 8/10 digit card number) Exit DELETE USERS Programming Step Keystroke Combination Enter Programming Mode Master Code Delete Card User - Common Delete Card by Card (READ CARD) Cards can be deleted continuously Delete Card - By ID Number... - Page 9 SET RELAY CONFIGURATION Programming Step Keystroke Combination Enter Programming Mode Master Code Pulse Mode Relay Time* *1-99 seconds. Default is 5 seconds. 3 0 # Toggle Mode Sets the relay to ON/OFF toggle mode Exit SET STRIKE-OUT ALARM The strike-our alarm will engage after 10 failed card attempts (Factory is OFF).
- Page 10 SET CARD READING TYPE Programming Step Keystroke Combination Enter Programming Mode Master Code 9 3 # (factory default) Read EM & HID® card 9 4 # Read EM card only 9 5 # Read HID® card only Exit MASTER CARD USAGE Using Master Card to add and delete card users 1.
- Page 11 TRANSMITTER SOLUTIONS WARRANTY The warranty period of Transmitter Solutions keypad is twenty-four (24) months. This warranty shall begin on the date the keypad is manufac- tured. During the warranty period, the product will be,repaired or replaced (at the sole discretion of Transmitter Solutions) if the product does not operate correctly due to a defective component.
- Page 12 3850 West 2480 South, Suite B Salt Lake City, UT 84120 (866) 975-0101 • (866) 975-0404 fax www.transmittersolutions.com...
Need help?
Do you have a question about the DOLCSAW1000H and is the answer not in the manual?
Questions and answers