Position Setting - vogel's PPL 1515 Installation Manual

4.3 Position setting

Position setting is only possible in MANUAL MODE
4.3.1 Get in MANUAL MODE
Use a narrow, pointed object (straightened paperclip)
o Press and hold the OVERRIDE button (on the back)
o Press UP
o Release UP
o Then release OVERRIDE
Test the lift system by pressing the DOWN button. The lift should only descend
while the button is pressed. The lift will stop immediately when the button is
released.
4.3.2 Get back in AUTOMATIC MODE
o Press and hold in the OVERRIDE button (on the back)
o Press STOP
o Release STOP
o Then release OVERRIDE
Test the lift system by pressing the UP or DOWN button once. The lift should
automatic move to home of show position.
4.3.3 Set SHOW POSITION
The show position is the height at which the lift system automatically stops and the
projector projects the image on the screen.
1.) Get the system in Manual Mode (see 4.3.1)
2.) Press DOWN to lower the lift to the required Show/projection height.
3.) Lock this position
o Press and hold in the SET button (on the back)
o Press UP
o Release UP
o Then release SET
4.) To return to the Automatic mode (see 4.3.2)
Page 13
Lift system manual