Table of Contents DFC9200 Subrack Page About This Manual DFC9200 Subrack Features Typical Application Attention Instructions Power Input Panel Rear Subrack Panel LED Status Indicators for TRX ELECTRICAL SPECIFICATIONS GENERAL PARAMETERS PHYSICAL SPECIFICATIONS INSTALLATION...
About this manual DFC9200 Series Before operating the unit, please read this manual thoroughly and retain it for future reference. The explanation given in this manual can be applied to the following model unless noted otherwise. DFC9200-1 19” x 2U Subrack, 16 Slots and 1 Power Supply Warning Do not open the enclosure.
Features 19”L x 3.5”H (2U) Subrack Frame and PSU Highest Density in Surveillance Industry 16 Single Card Slots and 1 Power Supply Cards & PSU Power-on LED Status Indicators Hot swappable Card Units 100-240VAC, Auto Ranging PSU Regulatory Compliance with UL, CE and FCC...
ATTENTION Do not exceed the range of the adaptor between 100-240VAC For Indoor environment, operating temperature and humidity are controlled within the working parameter or else may cause damage to the units. Use the protective covers for optical transmitters when not connected with patch cords –...
The Power Input Rear Panel Power input panel features input socket, on/off switch and LED indicator light: Function Function Function Function Color FX 1000 Green Lit when 1000Base-FX operation. Green Lit when fiber cable connection Link/ACT with remote device is good. Blinks when any FX traffic is present.
ELECTRICAL SPECIFICATIONS Input Voltage 100/240VAC, 50/60Hz Power Consumption Output Voltage Ripple ≤50mV Noise ≤50mV GENERAL PARAMETERS Power on LEDs Cards and PSU PHYSICAL SPECIFICATIONS Operating Temperature -10°C ~ +50°C Relative Humidity 5% - 95% non-condensing External Dimensions 19” (485mm) L 9.65”...