Advertisement
Table of Contents
Thank you for your purchase of the Transmate DeChlorinator. Please read and understand
this short operation manual. Our goal is to serve you, our customer. If you have any questions
or improvement suggestions please call us at 1-800-426-9341.
Solution Mixing ...........................................................................................................pg. 2
Components ...............................................................................................................pg. 3
Set-Up .......................................................................................................................pg. 4
Operation....................................................................................................................pg. 5
Toubleshooting ...........................................................................................................pg. 6
Romac Industries, Inc.
21919 20th Avenue SE • Suite 100 • Bothell, WA 98021
800 426 9341 • 425 951 6200 • Fax 425 951 6201 • www.romacindustries.com
deChlorinator
TABLE OF CONTENTS
Transmate
Manual
deChlorinator Operations Manual
08/30/2018 Rev.
1
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Romac Industries Inc. Transmate deChlorinator
- Page 1 Manual Thank you for your purchase of the Transmate DeChlorinator. Please read and understand this short operation manual. Our goal is to serve you, our customer. If you have any questions or improvement suggestions please call us at 1-800-426-9341.
- Page 2 Transmate deChlorinator Solution Mixing Vita-D-Chlor FEED SOLUTION MIXING AND FEED SOLUTION VALVE SETTING CHARTS This chart is good for water flow between 175 - 900 gpm If... Then add... Set Control Valve on... Cl.(ppm, mg/l) Vita-D-Chlor cups for maximum Cl. value per 5 gal water 0 - .5...
- Page 3 Transmate deChlorinator Components HANDLE FEMALE CAM LOCK FITTING - Used to HYDRANT ADAPTER - Threads connect deChlorinator VACUUM GAUGE - Displays onto the outlet of a fire hydrant to to hydrant adapter. amount of vacuum created by connect to the deChlorinator. water flow.
- Page 4 Transmate deChlorinator Set-Up Connect the hydrant adapter, control valve, NOTE: When using deChlorinator at very or extension hose directly to the hydrant. high flows, be sure to place pin in hole Thread the hydrant adapter onto the end of (shown below) to prevent the camlock from the control valve or extension hose if used.
- Page 5 Transmate deChlorinator Set-Up CONFIGURATION #3 This configuration is used when you wish to use the deChlorinator unit between hoses leading to the hydrant adapter and diffuser. NOTE: Keep in mind the extension hose needs to be extended straight out with no kinks or bends. Connect female end of the extension hose to hydrant adapter.
- Page 6 Transmate deChlorinator Operation Once you have completedyour set-up, the last steps are simple. This section of the manual deals with your deChlorinator’s gauges, valves and hoses. It will outline and explain the flow direction, vacuum gauge and feed solution valve. The flow direction for dechlorinating is clearly marked on the top of your deChlorinator.
- Page 7 Transmate deChlorinator Operation Now that you have the feed tubes connected properly you’re ready to start the flow of water. Begin the flow of water The feed solution flow can be fine-tuned with the control Control valve will fine-tune valve. This allows just enough the flow of the feed solution dechlorinating solution to be fed to the water flow and extends...
-
Page 8: Troubleshooting
Transmate deChlorinator Troubleshooting Problem Possible Solutions deChlorinator not producing • Open up feed solution valve. Rotate valve in counterclockwise enough suction direction to open. • Increase water flow rate. • Check for blockage. • Elevate bucket above deChlorinator. This will create a siphon. •...
Need help?
Do you have a question about the Transmate deChlorinator and is the answer not in the manual?
Questions and answers