Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Zebex Manuals
  4. Card Reader
  5. ZM-800
  6. Quick start manual

Zebex ZM-800 Quick Start Manual

Magnetic stripe reader
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
Magnetic Stripe Reader
Quick Start Guide
The information contained herein is provided to the user as a
convenience. While every effort has been made to ensure accuracy,
we are not responsible for damages that might occur because of
errors or omissions, including any loss of profit or other commercial
damage. The specifications described herein were current at the
time of publication, but are subject to change at any time without
prior notice.
Rev. 1.0 P/N: 593-7M800E-200
Copyright © 2010. All rights reserved.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZM-800 and is the answer not in the manual?

Questions and answers

Summary of Contents for Zebex ZM-800

  • Page 1 Magnetic Stripe Reader Quick Start Guide The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, we are not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage.
  • Page 2 Introduction This magnetic stripe reader can read 1, 2 or 3 tracks of magnetic strip information, available in keyboard, USB/KB, USB/HID and RS-232 interfaces. It is fully programmable with a configuration utility. The data can be formatted with preamble/postamble and terminator characters to match the format expected by the host.

  • Page 3: Specifications

    Specifications Operating Current: 40 mA maximum. Operating Temperature: 0˚C ~ 55˚C (32˚F ~ 131˚F) Storage Temperature: -30˚C ~ 70˚C (-22˚F ~ 158˚F) Relative Humidity: Maximum 95% non-condensing. Magnetic Head Life: 1,000,000 passes minimum. Rail and Cover Lift: 1,000,000 passes minimum. Magnetic Stripe Recording Two frequency coherent phase Method:...
  • Page 4 Magnetic Track Basic Data Format Track 1: <SS1><T Data><ES><ENTER>* Track 2: <SS2><T Data><ES><ENTER>* Track 3: <SS3><T Data><ES><ENTER>* where: SS1(start sentinel track 1) = % SS2(start sentinel track 2) = ; SS3(start sentinel track 3) = ; for ISO, ! for CDL, % for AAMVA ES(end sentinel all tracks) = ? Keyboard/USB Communication Default Settings...