Advertisement
Troubleshooting
If you experience any of the problems listed below, please check the
solution possibilities before calling a customer service representative.
PROBLEM
Unit doesn't
operate
Dehumidifying
function doesn't
work
No air is
discharged
Operation
is noisy
Dehumidifier components
Control panel
Removable
washable filter
10.5 pint reservoir
Front door
Lockable caster
wheels
Thanks again for choosing an Ideal Air™ Commercial-Grade Dehumidifier
POSSIBLE CAUSE
Has power cord been
disconnected?
Is "tank full" indication
lamp blinking? (Tank is full
or in a wrong position.)
Is temperature of room
above 95˚F or below 40˚F?
Is air filter clogged?
Is intake duct or discharge
duct obstructed?
Is air filter clogged?
Is unit tilted or unsteady?
Is air filter clogged?
SOLUTION
Plug power cord into outlet.
Empty water in drainage
tank and then reposition
tank.
Protection device is
activated and unit cannot
be started.
Clean air filter as
instructed under "Cleaning
the Dehumidifier".
Remove obstruction from
discharge duct or intake
duct.
Clean air filter as instructed
under "Cleaning the
Dehumidifier".
Move unit to a stable,
sturdy location.
Clean air filter as instructed
under "Cleaning the
Dehumidifier".
Handle
Door latch
Can be plumbed for
permanent drainage
Advertisement
