Remote Ip Address; Port Number - TC Communications TC1910 User Manual

Remote Unit Description (not require): Enter the description for the remote unit.

Remote IP Address:

Port Number:

Note: (Some of the well known port numbers such as 1, 23, 80 , 546, and 547 cannot
Gateway IP Address:
DNS IP Address:
Click the "Undo" button or browser's "Back" button to cancel all the changes
Click the "Submit" button to save the changes, and you will see the following screen.
(not require for master unit.) For Slave unit, this is the IP Address of the remote
Master. (It is recommended that user enter the remote Slave IP address here
for the master unit for future refrence.)
The default remote IP Address for master is 192.168.254.124, and the
default remote IP Address for slave is 192.168.254.123.
This is the port which the TC1910 units will attempt connections.
Default value is 1910. (Range: 1-65535).
be used as communication ports because they are already used internally by the
unit itself.)
If your connection contain a router, enter the IP Address of the Router (LAN
side.)
Default value is 0.0.0.0 If you are using the DHCP option, this value will
be set automatically.
If you need to connect outside of your LAN, enter the DNS IP address here.
Default value is 0.0.0.0 If you are using the DHCP option, this value will be set
automatically.
- 15 -
TC1910
User's Manual
Rev. 2.0 (A0.3)