Projection Size - Linde Warnprojektor 45 Original Instructions Manual

 Establish an electrical connection between
the projector and the bush (2) using the
supplied cable (1).
The device is ready for use.
NOTE
By default, the Linde warning projector ope-
rates continuously. It can only be switched
on and off by connecting/disconnecting the
power supply.

Projection size

The projection size of the warning pictogram
depends on the distance between the warning
projector and the projection surface. The
output power of the LED and the ambient
lighting increases or decreases the range at
which the image is still clearly visible.
The following projection sizes apply to a
projection distance of 10 m for both output
powers:
Distance
Operating Instructions – 3008011680 EN – 06/2018
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
2
1
Projection size
0.3 m
0.6 m
0.9 m
1.2 m
1.4 m
1.7 m
2.0 m
2.3 m
2.6 m
2.9 m
3
Assembly
Projection size
LWP_05
9