Fish Hawk TD User Manual

USER GUIDE
The Fish Hawk TD gives anglers the
critical water temperature and depth
information essential for consistent
catches.
How It Works
Thanks to highly accurate tempera-
ture and water-pressure sensors,
the Fish Hawk TD provides a
temperature profile of the entire
water column. Simply attach the
Fish Hawk TD to a fishing line or
downrigger cable. As the Fish
Hawk TD is lowered through the
water, a temperature reading is tak-
en every 5-feet. After retrieving the
Fish Hawk TD, water temperature
and depth information is displayed
on the built-in LCD screen (5', 10',
15', 20', 25' etc...) Temperature
and depth data is stored in memory
until the TD is used in the water
again.
Instructions
1. Attach the Fish Hawk TD to
a fishing line or downrigger
cable using the included snap
attached through the round hole
on top of the TD.
2. Press the START button
3. Wait for READY to appear on
the LCD screen
4. Lower the Fish Hawk TD at a
steady pace
5. After letting out the desired
amount of line, retrieve the Fish
Hawk TD
6. Press the VIEW button to scroll
through the temperature and
depth data
7. The Fish Hawk TD will shut-off
automatically 45-seconds after
use
Checking Depth
Using the Max Depth Mode
The Fish Hawk TD has a Max
Depth Mode which records the
maximum depth of each drop to
the nearest 1-foot mark; making it a
great tool for finding out how deep
your divers, copper, and lead-core
lines, and downrigger balls really
run. To measure the running depth,
let out the desired amount of line
and engage the reel. Now turn the
TD on and attach it over the line us-
ing the supplied snap - the TD will
now "free slide" down the line to
the end of the line. When you feel