Safety Instructions (1) Read safety and operating instructions carefully. (2) Always wear suitable footwear. Do not edge in bare feet. (3) Always stop the engine and disconnect the sparkplugs when guards are not in place. (4) Check that the items to be edged are free of all foreign debris. This includes and is not limited to nails, wire rope etc.
Operating Instructions Before starting read the Safety Instructions, Operating Instructions and the Engine Operating instructions. Always ensure that the engine has oil as per engine instructions. Engine Operation Pre-Starting :Read the Engine Operating Instructions Carefully. Always check that there is oil in the engine. Use correct oil and fill as per engine manufacturer's instructions.
Edger Operation 1/ Oil and fuel engine as per engine manufacturers. Make sure height adjuster is at the top or highest so the blade does not make contact with the ground. Make sure the throttle control is at its lowest rev setting. The blade will turn as soon as the starter is pulled.
Page 5
Maintenance Warning: Always make sure the Edger is completely disabled by making sure the engine has stopped and removing the spark plug lead before you remove any guards or do any maintenance. Adjusting the Drive Belt WARNING: Make sure the spark plug lead has been disconnected.
Page 6
Warranty Exclusions, Limitations and Rights. (1) Any failure that results from accident, abuse or neglect is not covered by this warranty. (2) Transport of the GE22 Edger to and from the manufacturer, their agents or dealers, to be paid for by the owner.
Need help?
Do you have a question about the GE22 and is the answer not in the manual?
Questions and answers