1. Manuals
  2. Brands
  3. STLab Manuals
  4. Computer Hardware
  5. C-221
  6. User manual

STLab C-221 User Manual

Expresscard firewire 1394a (2 ports) + usb2.0 (1 port)
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

1394a + USB 2.0 ExpressCard
User Manual
Ver. 1.00
All brand names and trademarks are properties of their
Respective owners.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-221 and is the answer not in the manual?

Questions and answers

Related Manuals for STLab C-221

Summary of Contents for STLab C-221

  • Page 1 1394a + USB 2.0 ExpressCard User Manual Ver. 1.00 All brand names and trademarks are properties of their Respective owners.

  • Page 2: Features And Benefits

    Features and Benefits General Fully compliant with ExpressCard Specification 1.0 ExpressCard/34 Form Factor Module Hot-swapping feature allows to connect or disconnect devices without powering down system Support Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit IEEE 1394a Compliant with IEEE 1394-1995, 1394a-2000 and OHCI 1.1 standards Provides two external independent FireWire 400 ports Data transfer speeds of 100, 200 and 400 Mbps are supported...

  • Page 3: System Requirements

    Supports data transfer rates of high-speed (480Mbps), full-speed (12Mbps), and low-speed (1.5Mbps) System Requirements Windows® 2000/XP/Server 2003 SP1 or above/Vista ExpressCard-enabled system with an available ExpressCard slot Package Contents 1 x 1394a + USB 2.0 ExpressCard 1 x User’s Manual Optional Accessories Ulead Video Studio CD IEEE 1394a Cable...

  • Page 4: Hardware Description

    Hardware Description CAUTION: Use only switching power adapter with following specifications: Switching power adapter (Optional) DC 12V, 1A Polarity: Outside negative voltage(-) & Inside positive voltage(+) 3.5mm power jack MN7000000050  Page 4 ...

  • Page 5: Hardware Installation

    Hardware Installation General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed. Insert the Card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection.
  • Page 6 Inserting/Removing Devices When inserting/removing your FireWire device, hold the ExpessCard and make sure it does not move around inside the slot, otherwise, the ExpressCard may loose connection or should be ejected from the system.

Table of Contents