Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Holybro Atlatl Mini FPV
Summary of Contents for Holybro Atlatl Mini FPV
- Page 1 Atlatl Mini FPV Video Transmitter V1.0 User Manual & Installation Guide...
- Page 2 [Type here] [Type here] Contents Overview ................... 1 Features Specifications Warranty Pinout Diagram and Channel Table ........3 Installation Guide ................4 Using The OSD………………………………………………...……5-6 P a g e ATLATL mini...
-
Page 3: Specifications
Overview Features • Compatible with all major FPV receivers from vendors such as Fatshark, ImmersionRC, etc. • Supports the standard 40-channel set: band A, B, E, Fatshark, and Raceband. • TBS Telemetry Protocol input allows remote control by the flight controller. Change channel, transmit power, and more from Betaflight OSD, flight controller USB port, Taranis Lua Script, and more. - Page 4 If product is damaged or defective, we will repair or replace it. Refunds are only given when product is lost by the shipping company. The refund amount is limited to the price of the product. Shipping costs are never refundable. Contact us at: • Email: productservice@holybro.com • Facebook Page: Holybro P a g e ATLATL mini...
- Page 5 Pinout Diagram and Channel Table Function Video In (from camera) SmartAudio Input Ground Input Voltage (4.5 to 5.5 volts) Band A 5865 5845 5825 5805 5785 5765 5745 5725 Band B 5733 5752 5771 5790 5809 5828 5847 5866 Band E 5705 5685 5665...
-
Page 6: Installation Guide
Installation Guide The Atlatl Mini is small enough to install almost anywhere on your quad that you find convenient. Typically it would be mounted using double-sided tape, and possibly a zip tie to hold it securely. Although the Atlatl’s MMCX connector is quite durable, we strongly recommend securing the antenna to the frame so that the Atlatl won’t be damaged if the antenna is tugged on in a crash. - Page 7 Using The OSD If you are using a Betaflight Flight Controller with Betaflight OSD, you can manage the Atlatl’s transmit power and channel from within the OSD. Mode 2 Mode 1 The graphics above show the stick command to bring up the OSD menu. The stick command is: throttle centered, yaw left, pitch forward.
- Page 8 The screen to the right shows the current vTX settings. From here, you can change the frequency band, channel, and power level of the video transmitter. After making the changes, move the cursor to “Set” and press roll-right to confirm the settings. The Betaflight menu has pre-set output power values.
Need help?
Do you have a question about the Atlatl Mini FPV and is the answer not in the manual?
Questions and answers