Advertisement
User Manual
Introduction
Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is
designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a
choice of C6 HDBaseT, HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT.
Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over
distances of up to 70m and 1080p up to 100m. The modular design provides the ultimate in flexibility for
audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training
and public display application in schools, pubs etc.
Package Contents
Modular Matrix (including control board) with spaces for 2, 4 or 8 modular boards
IR Blaster
Blanking plates fitted to the rear of the units
IR Extender
Power Cord (2x for 16 and 32 port Chassis)
Remote control inc battery
User manual
Input boards – choose from C6 HDBaseT, HDMI, DVI-D and VGA
Output boards – choose from HDMI, DVI-D and C6 HDBaseT
Features
Modular Chassis
Supports HDMI 4K, C6 HDMI Extender 4K, VGA WUXGA and DVI 1080p resolutions
Modular input and output boards can be mixed between multiple interfaces
Supports Audio pass-through on all boards
Supports RS232, Telnet and Web GUI controls
Supports multiple EDID modes
16 & 32 port models have redundant power supplies
Rack Mountable
Installation
Your modular matrix may need some assembly, before installing the modular boards please ensure you
have taken the appropriate steps to avoid static discharge. Assembly should only be attempted by a
qualified person and the chassis should not be connected to the power when adding the boards. The
boards are not hot pluggable and if further boards are to be added, the unit must be powered down and
unplugged.
Make sure all your devices are switched off before making any connections. Once all the connections
are made, switch on the devices in this order: displays, Matrix, source devices.
Operation
Front Panel – 8x8 Version
1.
Power Button & LED: Press this button to turn the Matrix on, press it again to put it in
standby mode. The LED will illuminate red in standby mode. If the LED is flashing then the
internal temperature is too high and the Matrix needs ventilation.
English
Advertisement
