Download Print this page

Zadro Surround Light SLVT710 Operating Instructions

Dimmable sunlight vanity mirror

Advertisement

Quick Links

Dimmable Sunlight Vanity Mirror
Surround Light™
Model No. SLVT710
Important Safety Instructions
READ ALL INSTRUCTIONS BEFORE USE
*SAVE THESE INSTRUCTIONS*
FEATURES
Your ZADRO™ Lighted Mirror is designed to reproduce the
effects of natural sunlight and provides maximum illumination.
If properly used and cared for, this vanity mirror will assist
with your beauty routine for years to come.
The Most Technologically Advanced Mirror On The Market
Natural Dimmable Sunlight Equivalent To 110 Watts
Tri-Fold Mirrored Doors Allow Viewing From All Sides
Closed Doors Protect Mirror And Keeps Surface Clean
Built-In Power Outlet
Stands 18" Tall or can be folded down to 8 ½"
OPERATING INSTRUCTIONS
1. To turn on lights, simply turn the switch at the base of the
mirror.
2. After use always switch to OFF position.
3. Your dimmable sunlight vanity mirror is angle adjustable
DANGER/WARNING
To reduce the risk of burns, fire, electric
shock, or injury to persons:
• Always unplug this appliance from the electrical outlet before
cleaning.
• Unplug from outlet before putting on or taking off parts.
• Be sure the mirror is not in a position where it can reflect
sunlight. Reflected light can cause fire.
• Unplug from outlet before putting on or taking off parts.
• Close supervision is necessary when this appliance is
used by, or near children, or disabled persons.
• Use this mirror only for its intended use as described in
this manual. Do not use attachments not recommended
by the manufacturer.
• Never operate this mirror if it has a damaged cord or
plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return unit to
manufacturer for examination and repair.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Never operate where aerosol (spray) products are being
used, or where oxygen is administered.
• To disconnect, turn all controls to the off position, then
remove plug from outlet.
• Do not use an extension cord with this mirror.
• With any florescent light bulb product containing glass
and chemicals, reasonable care should be observed
when burned out lamps are discarded. Unbroken lamps
should never be put into fire, domestic incinerators, or
trash compactors.
This product is provided with a polarized plug. As a safety
feature, this plug will fit in a polarized outlet only one way. If
the plug does not fit, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use
an extension cord. Do not attempt to
defeat this safety feature.
CARE AND MAINTENANCE
• Always unplug the mirror before
cleaning.
• Use only a soft damp cloth or non-
abrasive cleaner to clean.
• Allow mirror to "cool" before storing.
Instructions for tightening and
loosening mirror hinge
If mirror hinge requires adjustment:
1. Hold onto mirror head with one hand
while placing a flathead screwdriver
or coin into screw on the side of mirror
hinge located on the right side. (Fig. I)
2. Use a flathead screwdriver or coin as
shown. (Fig. II)
3. Turn the screwdriver or coin
clockwise to tighten the hinge.
4. Turn the screwdriver or coin counter
clockwise to loosen the hinge.
Light bulb replacement
To replace the light bulb, place the mirror face
down on a flat surface and follow these steps:
1. Unplug the power cord from the outlet.
2. Remove four lens locking screws. (see
Fig. A)
3. Remove front lens cover (see Fig. 1) by
pulling front lens cover out.
4. Use a small thin object (like a paperclip)
to pry the bulb loose from the clip at the
top.(Fig.2)
5. Hold light bulb at top and
gently roll it towards you and
disengage from socket. (see Fig. 3)
6. Line up new bulb with socket and roll
into place.
7. Reinstall lens and four screws.
ADDITIONAL AND REPLACEMENT PARTS
Model
Description
FB581
T-5 Replacement bulb for SLVT710
To order, visit our website at www.ZADROINC.com
or call customer service at (800) 468-4348
90 Day Limited Warranty
90 day limited warranty from date of purchase
against defects in materials and workmanship. This
warranty does not include damage to the product as
a result of misuse or accident.
Should your product become defective during the warranty
period, package the item securely and return it, prepaid/
insured, along with proof of purchase to: Zadro Products, Inc.
Attn: Customer Service.
To insure prompt repair, be sure that you provide complete
legible information and a note indicating the nature of
the product defect. We will repair or replace (at our sole
discretion) your product at no charge. Please include a $10
(check or money order) to cover return postage and handling
charges. Zadro Products Inc. shall not be liable for any
incidental or consequential damages arising out of defects in
this product, whether or not caused by its negligence.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty gives you
specific legal rights and you may also have other rights,
which vary from state to state.
Fig.1
Thank you for choosing Zadro Products, Inc.
© Zadro Products, Inc.
Fig.2
5422 Argosy Ave.
Huntington Beach, CA 92649
(800) 468-4348 • (714) 892-9200
Fax: (714) 892-7477
Email: zadroinc@zadroinc.com
www.zadroinc.com
Fig.3
Z
Z
adro
adro
SLVT710
Dimmable Sunlight
Vanity Mirror
Surround Light™
Important Safety Instructions
Rev.12232013

Advertisement

loading

Summary of Contents for Zadro Surround Light SLVT710

  • Page 1 • Unplug from outlet before putting on or taking off parts. or exclusions may not apply to you. This warranty gives you • Be sure the mirror is not in a position where it can reflect specific legal rights and you may also have other rights, Light bulb replacement sunlight. Reflected light can cause fire. which vary from state to state. • Unplug from outlet before putting on or taking off parts. Fig.1 To replace the light bulb, place the mirror face • Close supervision is necessary when this appliance is Thank you for choosing Zadro Products, Inc. down on a flat surface and follow these steps: used by, or near children, or disabled persons. 1. Unplug the power cord from the outlet. • Use this mirror only for its intended use as described in SLVT710 2. Remove four lens locking screws. (see © Zadro Products, Inc. this manual. Do not use attachments not recommended Fig. A) by the manufacturer.
  • Page 2 *GUARDE ESTAS INSTRUCCIONES* * CONSERVER CES INSTRUCTIONS* Unbroken lampes ne doivent jamais être mis en feu, les CARACTERÍSTICAS Este producto está equipado con un enchufe polarizado. incinérateurs domestiques, ou compacteurs de déchets CARACTÉRISTIQUES Su Zadro ™ iluminado espejo está diseñado para reproducir Como medida de seguridad, este enchufe calzará en un ménagers. Votre ZADRO ™ Lighted Mirror est conçu pour reproduire les los efectos de la luz natural y ofrece la máxima iluminación. tomacorriente polarizado de una sola manera. Si el enchufe effets de la lumière naturelle et offre un éclairage maximum.