ID-AL My Video Player VP320 Quick Start Manual

1 Introduction
This guide explains how to quickly start up the player for the first use. For the firmware, additional software and the
complete user guide of the product, see the support page of the My Video Player on www.id-al.com.
2 Preparation of the Storage Device
Choose a quality microSD card or USB flash drive, and format it as
FAT32. Store on it useful files according to the organization demanded
by the player (see given opposite example). Do not use special or
accented characters.
• Optional configuration files in the SYSTEM folder at the root:
serial.txt,
maintenance.jpg, etc.
•
Organization of the playback folders at the root:
° No subfolders allowed.
° Naming: xxx Name [TAG1][TAG2] or SYNCHRO
 xxx: folder no. from 000 to 999 used by the commands.
The AutoPlay feature uses the 000 folder.
 Name (optional): folder name (free).
 [TAGx] (optional): tags controlling the playback. See the
chapter Folder and File Tags.
• Organization of the files in the playback folders:
° Format: MP4, MKV, MOV, WAV, MP3, M4A, OGG, JPG, PNG,
BMP and more.
° Naming: Name [TAG1][TAG2].ext
 In sequential mode, the files are played in the
alphanumeric order.
 Name: filename (free).
 [TAGx] (optional): tags controlling the playback. See the
chapter Folder and File Tags.
 ext: extension according to the file format.
© 2018, Waves System - 7 impasse de La Ville en Bois, 44830 Bouaye, France - Phone: +33 (0)2 40 78 22 44 - info@wsystem.com
ID-AL My Video Player
Quick Start Guide V1.0 for VP320 and VP330
scheduler.tm2,
The My Video Player range is composed of standalone 4K HDR
UHD video players supporting video, picture, and audio files in many
formats stored in an internal memory, or on a microSD card or a
USB flash drive. Files can be played automatically according to an
"AutoPlay" setting, a timestamped programming, or a triggering by
external events (input contacts, RS-232 or TCP/IP commands,
infrared remote control).
1 Headphone stereo audio output, standard 3.5 mm (TRS) jack
2 Infrared sensor
3 Clickable knob (volume)
4 Status LED
5 0 dBu line-level stereo audio output, RCA connectors
6 Class D amplified speaker stereo audio output, pluggable terminal blocks
7 USB Host 2.0 for USB flash drive, type-A receptacle
8 Standalone opto-isolated input and power supply output, pluggable terminal block
9 HDMI audio/video output, type-A (standard) receptacle connector
10 microSD card slot
11 10/100 Mbps Ethernet, RJ45 connector
12 USB Host 2.0 for USB flash drive, type-A receptacle
13 External DC power supply chassis socket
14 RS-232 serial link and power supply output, pluggable terminal block
15 8 opto-isolated input contacts and power supply output, pluggable terminal block
16 8 MOSFET outputs and power supply output, pluggable terminal block
17 5 V DC output, pluggable terminal block
waitscreen.jpg,