Download Print this page

I2SE PLC Stamp 1200 Quick Start Manual

Micro evk

Advertisement

Quick Links

PLC Stamp 1200 Micro EVK
Quickstart Guide
I2SE GmbH
February 17, 2017
1/5

Advertisement

loading

Summary of Contents for I2SE PLC Stamp 1200

  • Page 1 PLC Stamp 1200 Micro EVK Quickstart Guide I2SE GmbH February 17, 2017...
  • Page 2 CONTENTS CONTENTS Contents 1 Introduction 2 Connect the bundle ... 3 Start the bundle 4 Contact...
  • Page 3 Changes February 17, 2017 initial release 1 Introduction With the PLC Stamp 1200 micro evaluation kit you can kickstart the development of your own Homeplug AV2 Powerline enabled device. The bundle consists of: 1x PLC Stamp 1200 micro 1x PLC Stamp 1200 micro EVB...
  • Page 4 2 CONNECT THE BUNDLE ... Figure 1: EVB Connections Figure 2: Setup...
  • Page 5 4 CONTACT 3 Start the bundle After inserting the IEC power connector into the PLC Stamp 1200 micro EVB and the PLC Gigabit Adapter into the wall socket both devices boot up. This takes less than 5 seconds. Both PLC devices are configurated to be in the same power LAN by default. For security reasons you can change the predefined network membership key, see datasheet for this.