Huawei EC228 User Manual page 9

1. Plug the mini-universal series bus (USB) connector into the EC228.
2. Plug the connectors of the main USB data cable and the auxiliary USB
data cable into the USB interfaces of the computer.
Installing the Management Program
1. Connect the EC228 with the computer.
2. The OS auto detects and recognizes new hardware and starts the
installation wizard.
Note: If the auto-run program does not respond, go to the driver path. Find and
double-click the AutoRun.exe, and then the program will run.
3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon for management
program is displayed on the desktop.
Removing the EC228
Follow these steps strictly to remove the EC228 from your PC. Otherwise,
your system may be damaged, even if it is in the standby mode.
Note: Before removing the EC228, you need to log out of the management program
first.
1. Double-click in the system tray.
The Safely Remove Hardware interface is displayed.
2. Select Huawei Device (actual name based on the name displayed in this
menu – "Huawei Mobile Connect - 3G Modem" for example) in the
Hardware devices list, and click Stop.
The Stop a Hardware device interface is displayed.
PC
5