Bluetooth Connection; Control The Unit - Pro-Ject Audio Systems Stream Box S2 Ultra Instructions For Use Manual

Bluetooth connection

Pairing with Android devices
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. All found devices will show up
now, tap on Stream Box S2 Ultra and confirm the connection.
Bluetooth pairing with Apple
Open Settings and tap on Bluetooth, turn on Bluetooth if it is not activated yet. Your device will automatically
start searching for available devices. Tap on Stream Box S2 Ultra and confirm "Pairing" on your Apple
device.

Control the unit

The control screen is divided into three parts: Browse, Playback and Queue
Browse works as a home page. Here you can go to any of the following pages.
Music library - here you can find all the available Music in your network and connected directly to the
streamer: USB or NAS. Your library will be created automatically and sorted using the available
metadata. (Some of these options are shown only when available)
Web radio – here you have access to a list of available internet radio stations. You also have access
to a list of selected internet radio stations under Pro-Ject Selection.
Bluetooth connection – enables the Bluetooth input. Play music from connected devices.
USB/PC - see chapter USB/PC
Shairport-Sync – This option lets you connect to Apple devices using the Airplay protocol
The following icons are shown after a successful login into the respective services under Settings > My Music
Tidal – gives you access to the Tidal streaming service
Spotify – gives you access to the Spotify streaming service
6
© Pro-Ject Audio Systems · Stream Box S2 Ultra · Revision 2018.07.26
devices
®