Power Connection / Initial Channel Search - Sanyo DP47840 Owner's Manual

GETTING STARTED
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to hook up
your antenna or cable connection and all AV
equipment correctly to your HDTV.
PLUG IN AC POWER CORD
120V AC, 60Hz
TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
TV SET LOCATION SELECTION:
Select "Home Mode" by pressing the CHM key to set
the HDTV's backlight to an Energy Star qualified level,
or select "Store Mode" by pressing CHL to set the
backlight to a retail display level.
CHANNEL AND AV SIGNAL SEARCH:
Press the CHLM key to perform a channel
search from an Antenna or a direct Cable
connection, and a signal search from devices
hooked up to the HDTV's AV input jacks.
CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected. Pressing
the CHLM key finalizes the setup process.
NOTE: To repeat the initial setup process press the MENU key.
AV INPUT SELECTION
Press the INPUT key to select the correct AV
input for the video source you wish to watch.
8
Need help?
(CONTINUED)
www.sanyoctv.com
INITIAL CHANNEL/SIGNAL SEARCH
CHANNEL SEARCH PROGRESS SCREEN
CHANNEL/SIGNAL LIST SCREEN
1-800-877-5032
INITIAL ENERGY SAVING
MODE SCREEN
SETUP SCREEN