Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Omicron EMCON 200
- Page 1 EMCON 200 User Manual...
- Page 2 The user is responsible for every application that makes use of an OMICRON product. OMICRON translates this manual from the source language English into a number of other languages. Any translation of this manual is done for local requirements, and in the event of a dispute between the English and a non-English version, the English version of this manual shall govern.
-
Page 3: Table Of Contents
PTP mode ........................... 11 Direct mode ..........................11 8.2.1 Network TAP ......................... 11 8.2.2 Long distance fiber connections ................... 12 Powering options PoE - Power over Ethernet ......................13 USB ............................. 13 Technical data Ordering information for SFP transceivers Support OMICRON... -
Page 4: Designated Use
Ethernet networks. Copper-based connections are limited to a certain data transmission rate and distance, whereas optical fiber cables can transmit more data over much longer distances. A media converter like EMCON 200 is used to connect your devices with a twisted pair Ethernet port to optical fiber networks. -
Page 5: Safety Instructions
► EMCON 200 and its accessories shall only be used when in a technically sound condition. Before use, always check EMCON 200 and its accessories for damage. -
Page 6: Compliance Statements
EMCON 200 Compliance statements EMCON 200 is designated in the following statements as 'product', 'equipment', or 'apparatus'. Declaration of conformity (EU) The equipment adheres to the guidelines of the council of the European Community for meeting the requirements of the member states regarding the electromagnetic compatibility (EMC) directive and the RoHS directive. -
Page 7: Recycling
OMICRON devices are subject to the EU Waste Electrical and Electronic Equipment Directive (WEEE directive). As part of our legal obligations under this legislation, OMICRON offers to take back the device and ensure that it is disposed of by authorized recycling agents. -
Page 8: Main Features
EMCON 200 Main features EMCON 200 comes with the following main features: ■ Cut-through forwarding between optical fiber and twisted pair copper networks • 100BASE-TX to 100BASE-X • 1000BASE-TX to 1000BASE-X ■ PTP transparent clock according to IEEE 1588-2008 for preserving time synchronization ■... -
Page 9: Device Overview
Conversion: Toggle between PTP transparent and direct conversion (→ page 11). Use a ballpoint pen or a pointed tool to operate the switch. Power: The LED shows you whether EMCON 200 is active. USB port: Connect a Micro-B USB 2.0 connector to power the device with a USB charger or a PC/laptop. -
Page 10: Link Speeds
SFP transceiver with 100 Mbit/s Link speed mismatch If the twisted pair Ethernet link partner of EMCON 200 does not support the link speed of the connected SFP transceiver, EMCON 200 shows one of the following error behaviors: • The green LED at the ETH port is off, and it is not possible to establish a network link. -
Page 11: Conversion Modes
8.2.1 Network TAP When you set up a network TAP to monitor or record network traffic, use two EMCON 200 media converters to connect your tapping device (e.g., OMICRON's DANEO 400 device) to the optical fiber network. The packet asymmetry created by the first media converter ("fiber to copper" connection) is compensated by the second media converter ("copper to fiber"... -
Page 12: 8.2.2 Long Distance Fiber Connections
EMCON 200 8.2.2 Long distance fiber connections For data transmissions over long distances, optical fiber cables are used. With EMCON 200 you can connect your twisted pair Ethernet network on both ends of the line to the optical fiber cabling. Again, the packet asymmetry created by the first EMCON 200 media converter is compensated by the second EMCON 200 media converter. -
Page 13: Powering Options
You can establish the power supply for EMCON 200 via its Micro-B USB 2.0 port. Use a common USB charger (e.g., from your mobile phone) or connect EMCON 200 with a USB cable to your PC or laptop. -
Page 14: Technical Data
EMCON 200 Technical data Ports Twisted pair ETH port • 100BASE-TX or 1000BASE-T • Auto-negotiation (100 / 1000 Mbit/s full duplex, depending on SFP transceiver) Optical fiber SFP port • 100BASE-X or 1000BASE-X • 50/125 or 62.5/125 multi-mode fiber •... - Page 15 EN 61326-1*; EN 55032 Class B; EN 55024 47 CFR 15 class B of FCC International IEC 61326-1*; CISPR 32 Class B; CISPR 24 * Only applicable if EMCON 200 is used together with a measuring device such as OMICRON's DANEO 400. OMICRON...
-
Page 16: Ordering Information For Sfp Transceivers
EMCON 200 Ordering information for SFP transceivers OMICRON offers some SFP transceivers that are tested and recommended for use with EMCON 200. However, the SFP port is unlocked, and you can use any SFP transceiver of your choice (at your own responsibility). -
Page 17: Support
Americas: +1 713 830-4660 or +1 800-OMICRON Asia-Pacific: +852 3767 5500 Europe / Middle East / Africa: +43 59495 4444 Additionally, you can find the OMICRON Service Center or OMICRON Sales Partner closest to you at www.omicronenergy.com Customer Portal - stay informed www.omicronenergy.com/customer... - Page 18 EMCON 200 OMICRON...
- Page 19 ENU 1190 05 01...