Wavecrest CyBlock Mini Appliance Setup Manual

CyBlock Mini Appliance
®
Enterprise-Level Web Filtering and Reporting Hardware
Manage Internet use in your organization
WAN LAN
Figure 1: Local Area Connection Status
Figure 2: Local Area Connection Properties
Figure 3: Internet Protocol Properties
| Setup Guide
STEP 1: Connect CyBlock Mini Appliance.
• Connect the mini appliance to your LAN (local area network) as if it were
another computer.
• Connect the right-side LAN port on the mini appliance to a network Hub using
an Ethernet cable.
STEP 2: Connect your computer to the mini appliance.
This step is similar to configuring a single computer to your network. You will need to
configure:
• IP address
• DNS
• Default gateway
Configure your computer. Record your current IP address information BEFORE making
the changes below, as you will want to change them back after you have successfully
configured the mini appliance.
• From the Start menu on your computer, open Settings and click Network &
Internet and then Network and Sharing Center.
• Under View your active networks, click Local Area Connection.
• The Local Area Connection Status screen
Properties button.
• Select Internet Protocol (TCP/IP)
button.
• Select Use the following IP address
• In the IP address field, type "10.40.10.2."
• In the Subnet mask field, type "255.255.255.0."
• Click OK, and then restart your computer.
Connect to the mini appliance browser interface. When your computer comes back up,
open a browser. In the address bar, type "http://10.40.10.3" and press ENTER. You
can now access the mini appliance through this interface
information to log on:
• Logon: admin
• Password: password
(Figure 1)
(Figure 2), and then click the Properties
(Figure 3).
Figure 4: CyBlock Logon Screen
will appear. Click the
(Figure 4). Enter the following