Redback A 2080 Operating Instructions

O
The REDBACK A 2080 Public Address Speaker Zone
Selection Panel allows you to select either;
1. One speaker zone only.
2. A combination of speaker zones.
3. All speaker zones
This allows great flexibility when paging.
By connecting together one or more Zone Selection
Panels in a 'Daisy Chain' fashion, any number of speaker
zones are available (eg Three Zone Selection Panels will
give you a total of 30 speaker zones).
PA Amplifier
100V
Output
Amp Input All Call
Zone Selector
Zone 1 to 10 Outputs
to Speakers
Speakers
Max Load
50W Per
Zone
Connecting one zone
selection panel.
REDBACK A 2080 PA Speaker Zone Selection Panel
PERATING
Amp Input
Master Zone
Selector
Zone 1 to 10 Outputs
Speakers
Max Load
50W Per
Zone
Distributed by Altronic Distributors Pty. Ltd. Perth. Western Australia.
Proudly Assembled in Australia
®
Zone Selection Panel
I
NSTRUCTIONS
I
NSTALLATION
We recommend the Zone Selection Panels for use only
with 70 Volt or 100 Volt line amplifiers with a maximum
load of 50 watts per zone (at 100V). Connecting these
units to a 4Ω or 8Ω amplifier system may damage your
amplifier.
We have supplied an identification strip (with double
sided tape) which can be attached to the front panel of
the unit. The identification strip can be engraved to help
identify your speaker zones.
PA Amplifier
100V
Output
All Call Amp Input
Zone 1 to 10 Outputs
to Speakers
Speakers
Max Load
50W Per
Zone
All Call
Slave Zone
Selector 1
to Speakers
Connecting two
or more zone
selection panels.
}
To Next Slave
Zone Selector
Doc. PS1292