Advertisement
Quick Links
Quick Start Guide
BroaMan MUX-22-CC
A pair of units providing bi-directional fiber transmission of 4 x 3G-SDI,
4 x Clear-Com INTERCOM ports, 4 x GPIO, 4 x LAN and SYNC
This Quick Start Guide describes all main features of the MUX-22-CC pair and describes how to connect system
in a few steps.
CABLE CONNECTION
BroaMan MUX-22-CC set is delivered as preconfigured point-to-point set which consists of two devices. It
requires only a proper cable connection to start working with the system. After unpacking the devices please
follow the steps:
1. Connect crossed duplex singlemode fiber cable locally on each device – from Link 1 transceiver to Link
1 coupler (this connection enables integration of Optocore board, which provides intercom and data
connectivity, into the COM fiber)
2. Connect crossed duplex singlemode fiber cable between two devices – from COM 1 coupler on the first
device to the COM 1 coupler on the second unit
Download Optocore Control Software V 2.21.019
from www.optocore.com/downloads
Advertisement
Related Manuals for BroaMan MUX-22-CC
Summary of Contents for BroaMan MUX-22-CC
- Page 1 A pair of units providing bi-directional fiber transmission of 4 x 3G-SDI, 4 x Clear-Com INTERCOM ports, 4 x GPIO, 4 x LAN and SYNC This Quick Start Guide describes all main features of the MUX-22-CC pair and describes how to connect system in a few steps.
- Page 2 Quick Start Guide CONNECTIVITY VIDEO * BNC Ports 1-4 – 3G/HD-SDI Inputs with reclockers (patched to outputs 5-8 on the second unit) * BNC Ports 5-8 – 3G/HD-SDI Outputs (patched to inputs 1-4 on the second unit) INTERCOM * TO PANEL 1-4 – four 4-wire ports to be connected with a straight Cat5 cable to four Clear-Com panels * TO MATRIX 1-4 –...