Calling Up Memory Information; Performing A Factory Reset - Hella Gutmann BPC-Tool Operating Instructions Manual

Service

Calling up memory information

5.3 Calling up memory information
To call up memory information:
1. In the main menu, select
2. Select >Memory information< and confirm with Select.
Memory information appears.
3. Return to the main menu with Back.
5.4

Performing a factory reset

Here you can reset the BPC-Tool to its factory settings. All data and files
are reset to their state on delivery if you perform the factory reset.
Proceed as follows to perform a factory reset:
1. In the main menu, select
2. Select >Factory reset< and confirm with Select.
3. Observe the confirmation prompt.
4. Confirm the confirmation prompt with Yes.
The BPC-Tool is automatically reset to its state on delivery.
5. Return to the main menu with Back.
18
Service and confirm with Select.
Service and confirm with Select.
BPC-Tool