Advertisement
1. EASY SETUP
Connect your devices as shown.
PLEASE WAIT 3 MINUTES
2. USING HIGH SPEED WI FI
Connect mobile devices to the new wireless network.
Find the info label on the bottom side:
1. Name (SSID)
2. Password
LED
Power
Wireless
Power and
Wireless
LEGEND
a. Internet
b. Modem
c. Receiver
d. Additional unit
Fig. 1
Fig. 2
Fig. 3
STATUS
Off
Solid white
Flashing white
Solid green
Flashing green
Solid red
Flashing red
Fast flashing
e. Check
f. Success
g. Out of range
Connection Kit 1700 Mbit/s
3. ADDI NG MORE CONNECTIONS
To extend an existing network, install an additional
STRONG Wi-Fi Connection Kit.
PLEASE WAIT 3 MINUTES
4. CHANGING WIRELESS SETTINGS
Open the web browser and type http://kit1700duo.local
to the address bar.
Change SSID and password in the quick setup wizard
menu. Changing the wireless settings on one access
point will automatically distribute the new settings to
the other one.
No power.
Power on.
Firmware upgrade in progress
Wireless connection established (good signal strength). If
configured as an Access Point: ready for connection.
Wireless connection is being established.
Wireless connection established (poor signal strength).
Wireless connection failed.
Factory reset button is pressed.
GENERAL DATA
Power consumption in operation: max. 12 W
Power consumption in standby:
Operating temperature:
Storage temperature:
Humidity range:
EVENT
3.5 W
0 °C ~ +40 °C
-40 °C ~ +70 °C
0% ~ 90%
EN
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Advertisement
