Subscribe to Our Youtube Channel
Related Manuals for Pablo BOLA DISC
Summary of Contents for Pablo BOLA DISC
- Page 1 BOLA DISC / FELT 120/240V ASSEMBLY & INSTALLATION INSTRUCTIONS INFO@PABLODESIGNS.COM 888 MARIN STREET SAN FRANCISCO, CA 94124 PABLODESIGNS.COM pg. 1...
- Page 2 120/240V ASSEMBLY INSTRUCTIONS BOLA CANOPY (EU: BLACK TO BRAIDED AND RED TO RED) 1. ATTACH MOUNTING PLATE TO JUNCTION BOX OR CEILING 4. TIGHTEN SET SCREWS ON CORD RELIEF 2. WIRE TRANSFORMER TO BUILDING 5. BRING CANOPY UP TO MOUNTING PLATE WITH BOLTS (US: BLACK TO BLACK AND WHITE TO WHITE) PASSING THROUGH THE HOLES ( EU: BLUE TO BLACK AND BROWN TO RED)
- Page 3 120/240V ASSEMBLY INSTRUCTIONS BOLA DISC NOTE: DISC COMES WRAPPED IN PROTECTIVE SLEEVE. USE PROVIDED GLOVES WHEN HANDLING LAMP. LEAVE SLEEVE ATTACHED UNTIL LAMP IS FULLY ASSEMBLED HOLD HEAT SINK AGAINST DISC AND SCREW STEM ONTO STATIONARY HEAT SINK CAPTURING DISC.
- Page 4 FELT 120/240V ASSEMBLY INSTRUCTIONS BOLA FELT SCREW STEM AND HEAT SINK TOGETHER MOVE FELT SHADE CAREFULLY SCREW GLOBE TO LED HEAD. LIGHT WIPE WITH A DRY CLEAN CLOTH. SHADE TO REMOVE DUST AND SMALL DEBRIS: CLEAN WITH A SOFT HAIR BRUSH OR USE A VACUUM. TO REMOVE OTHER SUBSTANCES: USE A DAMP CLOTH AND IF NEEDED A MILD DETERGENT.
Need help?
Do you have a question about the BOLA DISC and is the answer not in the manual?
Questions and answers