Device password ..................10 5.3 NETWORK ..................... 12 Create the network ................12 Manually routing the devices ..............12 MAINTENANCE ..................13 TROUBLESHOOTING .................. 13 7.1 No USB-connection to PC ................13 7.2 No response over RS485 ................13 Network Router User Manual...
This manual describes how to install and use SINTROL’s Network Router product. Sintrol shall not be liable for any loss or damage whatsoever arising from use of any information or details therein, or omission or error in this manual, or any misuse of the product.
4. The unit is not directly exposed to any kind of piling particles, especially conductive. 5. The unit is not directly exposed to soil dust, dirt, snow or rain. Enclosure supports optional mounting feet installation, to enable easy wall installations. Network Router User Manual...
Page 5
Figure 1 Installation with optional mounting feet. Network Router User Manual...
WIRING To connect the device, open the enclosure. Any unnecessary exposure of the connectors to moisture or dirt needs to be avoided. NC = Not connected. Table 1 Wiring and signals Network Router User Manual...
Page 7
0.2 to 1.0 mm 3. mini USB connector inside the box Serial communication: RS-485 Communication Interfaces USB Communication Protocol Proprietary Sintrol Network protocol Materials and Weight Enclosure Plastic ABS Weight 180 g Table 2 Technical specification...
OPERATION The Network Router creates and maintains the connections between Sintrol Products and Sintrol’s PC software, thus the main operation of the Network Router is mostly transparent. Device itself has but a few configuration related controls of its own. All the controls are managed by the dedicated Sintrol PC-softwares: DustTool and/or DustLog.
Network Router. RS485 When device is operating as a router, the RS485 role must always be set to Sintrol Network as a network master. Integration the unit with MODBUS-protocol is beyond this document.
Page 11
Figure 4 Properties tab Network Router User Manual...
By right-clicking the Network Router itself a control menu appears. From the menu it is possible to scan the network, in order to add new devices. Sintrol devices that are not a part of any network, will appear and join the new network automatically.
(device) within the network. Every Sintrol network device can be selected as a link. MAINTENANCE After automatic setup, the Network Router needs very little or no maintenance. However, keeping the product’s surface clean of dust or any other substance, is recommended.
Page 15
SINTROL Oy Ruosilantie 15 00390 Helsinki Finland Tel +358 9 5617 360 Fax +358 9 5617 3680 www.sintrolproducts.com Network Router User Manual...
Need help?
Do you have a question about the Network Router and is the answer not in the manual?
Questions and answers