Indoor Temperature Sensor; Setting And Using The Alarms - HoMedics SS-5080A Instruction Manual

INDOOR TEMPERATURE SENSOR

The SoundSpa ® Recharged is equipped with an indoor temperature sensor that
shows the temperature inside your room on the screen display. To adjust between
Fahrenheit and Celsius, simply short press the TIME SET button on the back of
the unit.

SETTING AND USING THE ALARMS

Setting Alarm 1 or Alarm 2
1. Press and hold (3 seconds) the desired alarm button (ALARM 1 or ALARM 2)
located on the top of the unit to activate the alarm set feature. (Fig. 1)
2. Use the VOLUME up/down button (or the TUNE up/down button) on top of the
unit to adjust the hour, paying attention to the AM and PM indicators.
3. Press the ALARM button again and the minute will begin flashing. Use the
VOLUME or TUNE buttons again to adjust the minute.
4. Press the ALARM button again to select the source. The alarm can be set
to sound a Beep, Nature Sound or play the FM radio. Select using the TUNE
or VOLUME up/down buttons. NOTE: This will only pick the source you wish to
wake you. To customize the sound you wish to listen to, first select the source
as sound, next press the SOUND button to select the sound you wish to have
as your alarm. To customize the FM station you wish to listen to, before setting
the alarm, you need to turn on the RADIO. The FM alarm will always be the last
FM station you listen to.
5. Press the ALARM button again to adjust the maximum volume of the gradual
wake feature (alarm begins soft and slowly gets louder) by using the TUNE or
VOLUME buttons to adjust the sound level up or down.
6. Press the ALARM button a final time, the alarm is now set.
TURNING OFF THE ALARM / SNOOZE OPERATION
The Sound Spa is equipped with gradual wake, which means that the alarm begins
soft and slowly gets louder. This will ensure a non-jarring wake-up.
• After the alarm sounds, press the SNOOZE bar located on the top of the unit and
the alarm will sound again after nine minutes.
Note: You may only press the SNOOZE button during the ALARM mode for one
hour (7 times). After the seventh time, the alarm will turn off and will not sound
again until the next set time.
• To turn off the alarm, press any button (except the SNOOZE/DIM/SLEEP button)
on the top of the unit.
5