Advertisement
1
2
3
Base
4
Glass Table Top
Rod
Seprator
Base
By using your cutting tool,
carefully open the
package and remove
the table and hardware.
Set the Glass table top
side down on a flat
surface, and screw the
included rods into their
mounting sockets.
Slide one base leg over
the two rods on the
longest side of the table
as shown in illustration,
and place the separator
disk over the rod towards
the narrowest end of the
table.
Slide the second base leg
over the rods, with the
short end of the leg over
the rod with the separator
disk.
Advertisement
