Advertisement
Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424
Installation Instructions
and Warranty Information
1962S 2004-08 Dodge Durango 5.7 HEMI
2004-2005 ONLY!
Read all instructions carefully before attempting installation.
Rev.1 2-28-13
Advertisement
Table of Contents
Summary of Contents for JBA 1962S
- Page 1 Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424 Installation Instructions and Warranty Information 1962S 2004-08 Dodge Durango 5.7 HEMI 2004-2005 ONLY! Read all instructions carefully before attempting installation. Rev.1 2-28-13...
- Page 2 JBA uses sealing beads on all its headers. We have found that when installed correctly, the raised bead around each port increases the pressure exerted on the gasket directly adjacent to the port and effectively prevents leaking gaskets.
- Page 3 Move the bracket to the lower open hole on the bell housing. Attach the bracket using the hard- ware provided. (See picture) 9. Install the new JBA Headers using the hardware and gaskets provided. Adjust transmission cable bracket to gain maximum clearance from header.
- Page 4 Applicable to 2004-2005 vehicles ONLY! LIMITED ONE YEAR WARRANTY All JBA HEADERS and exhaust products are guaranteed, to the original purchas- er, to be free of defects in materials and workmanship for one year. This warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation, customer applied aftermarket coatings or any discolor- ation or corrosion of finished surfaces.
Need help?
Do you have a question about the 1962S and is the answer not in the manual?
Questions and answers