Advertisement
Quick Links
van Aaken SmartBox™ C3.2 Installation
Vehicle:
Engine:
www.vanaaken.com
Our Website
Every effort has been made to ensure that these installation instructions are accurate and complete. If during installation
of your van Aaken SmartBox™ C3.2 you experience any difficulty please contact your supplier or van Aaken
Developments directly, with the information on where the product was purchased.
The van Aaken SmartBox™ C3.2
The van Aaken SmartBox™ C3.2 accurately alters fuel delivery with reference to engine speed and load, giving a
dramatic increase in power and torque throughout the rev-range. The three-position switch gives the user the choice of
easily adjusting the power level from inside the vehicle.
Kit Contents
•
van Aaken SmartBox™ C3.2
•
Plug-in Wiring Loom
•
Self-adhesive Velcro strips
•
Cable Ties
•
Installation Instructions
•
3 Position Toggle Switch
Installation – A quick explanation
Installation of the van Aaken SmartBox™ C3.2 is a very simple task that should take less than 5 minutes. Do not
be put off by the length of the explanation on the following pages. The steps are set out to ensure easy installation and to
help avoid accidental interference with other components.
To install the van Aaken SmartBox™ C3.2 simply unplug one connection on the vehicle and then plug the van Aaken
wiring harness between the disconnected vehicle plugs. You must then mount the box using the supplied self-adhesive
strips.
Instructions
Chrysler Dodge RAM
5.9L 6 Cylinder
Year:
2005
has further information on all of our
Website: www.vanaaken.com Email: usa@vanaaken.com
new
products.
van Aaken Developments USA LLC
4990 Valenty Rd., Suite C
Chubbuck, ID 83202
Phone: (208) 234-5660 Fax: (208) 637-0287
Advertisement
Summary of Contents for van Aaken SmartBox C3.2
- Page 1 Installation – A quick explanation Installation of the van Aaken SmartBox™ C3.2 is a very simple task that should take less than 5 minutes. Do not be put off by the length of the explanation on the following pages. The steps are set out to ensure easy installation and to help avoid accidental interference with other components.
-
Page 2: Before You Start
Aaken SmartBox™ C3.2 Chrysler Dodge RAM installation instructions Before You Start Additional items required to install the van Aaken SmartBox™ C3.2 : • Wire cutters to trim the supplied cable ties. • A cleaner suitable for safely removing dirt and oil from plastic. - Page 3 ECU plug. This will connect to the ECU plug that is closest to the front of the engine The smaller black 12-pin plug on the opposite end of the loom is used to connect the loom to the van Aaken SmartBox™ C3.2 unit. 2) Connecting the Loom Locate the 60 way plug on the ECU.
-
Page 4: Mounting The Unit
(no power gain) Switch Operation • If no switch is connected to the van Aaken SmartBox™ F the default setting will be Power 2 – it will give maximum extra power all the time. • If the included 3-position switch is connected the unit can be switched between Off, Power 1 and Power 2. -
Page 5: Please Read
Make sure that no other connections in the engine bay have been disturbed accidentally. If you can find nothing wrong and the vehicle will still not start, contact your supplier or contact van Aaken Developments directly stating where and when your van Aaken SmartBox™ C3.2 was purchased. -
Page 6: Warranty Statement
Aaken Developments Ltd 12 Month Warranty Statement van Aaken Developments Ltd (vAD) warrants to the original purchaser that any parts purchased shall be free from defects in material and workmanship. A defect is defined as a condition that would render the product inoperable.