Charge; Connect & Go - Motorola Escape 500 ANC Quick Start Manual

2. Charge

Fully charge before use. Any attempt to remove or replace your battery will damage your headset.
•
Charge: Before use, charge until the status light turns blue.
•
When battery runs out, charge headphones for 1 second before using with included headphone
cable to continue listening.
3. Connect & Go
Turn Bluetooth on
Note: The Battery should only be removed by a recycling facility. Any attempt to remove or
replace your battery will damage the product and void your warranty.
Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED PRODUCT PROPERLY.
Wall charger not
included
Turn headset on(charge before use)
On
Long press for 4 sec
Status Light – Blue flash rapidly Go to your
Bluetooth setting and pair 'Escape 500 ANC'
2