Page 1
HSGM Heißschneide-Geräte u.- Maschinen GmbH Operating instructions Heat-Cutter Type HSG-0-electronic Pic.: HSG-0-electronic with blade type R-50 (The blade is not included!) General information These operating instructions belong to this product. They contain important information about commissioning and operation. Please observe them, even if you pass the device on to a third party.
Page 2
Please exercise special caution when children are present. The structure of the Cutter complies with the safety class II. Make sure that the insulation of the housing is neither damaged nor destroyed. HSGM GmbH Telefon : +49 (0) 6123 9978-0 Edition : 06.11.2017...
Page 3
After the work is completed the device can be put away. The switch lever automatically returns to its limiting position and switches the device off. The switch lever must not be mechanically locked or electrically bridged. HSGM GmbH Telefon : +49 (0) 6123 9978-0 Edition : 06.11.2017...
Page 4
12s/48s on the type plate gives, at the front of the slash, the operating period provided a appropriate heat sink is available and, after the slash, the pause period for which the device should be switched off. HSGM GmbH Telefon : +49 (0) 6123 9978-0 Edition : 06.11.2017...
Page 5
All faults caused by possible material or production errors are covered by this warranty. The warranty lapses if the device is treated inappropriately or for purposes other than intended. HSGM GmbH Telefon : +49 (0) 6123 9978-0 Edition : 06.11.2017...
Page 6
Directives, when used for its intended purpose.In the case of a change of the product not co-ordinated with us this explanation loses its validity. Manufacturer: HSGM Heissschneide-Geräte und Maschinen GmbH In der Rehbach 13 D - 65396 Walluf Description of the device: ...
Need help?
Do you have a question about the HSG-0-electronic and is the answer not in the manual?
Questions and answers