Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for QuickSAT QS80
- Page 1 QS80 FLAT DISH USER MANUAL www.quicksatuk.com v0417-pre1...
- Page 2 Please note that it is important to retain your receipt or proof of purchase so that we are able to assist and deal with any enquiries you may have. QuickSAT is a product and brand name of Falcon Technical Ltd using our patented smart satellite finding technology For more information on QuickSAT and our products please visit our website: www.quicksatuk.com...
-
Page 3: Package Contents
Package Contents: Thank you for purchasing QuickSAT, the easy to use touring satellite system. With your purchase you will find the following contents:... -
Page 4: Dish Set Up
Dish Set up: 1) Loosen the fixing clamp on the tripod stand and push the legs downwards. 2) Extend the feet of the tripod stand as far as they will go for maximum stability 3) Ideally the tripod should be placed on reasonably level ground so that the tripod is vertical , use the ground anchor pegs to secure the tripod so that it isn’t accidentally moved or blown over by the wind. - Page 5 Insert the micro speaker (Item E) in to the output socket located on the side of the bracket Please ensure the micro speaker has batteries inserted and the switch is set to ON Once you have connected your QuickSAT dish and positioned the speaker and meter it should look like the image below:...
- Page 6 Connecting yo ur TV or receiver : NOTE: Thes e instructions show the optional Quic kSAT receiver (Item J) but the procedure will be very similar for other FREESAT and SKY set top receivers. This section takes you through connecting the optional receiver. Connect the receiver to the TV using the SCART adapter and/or RCA lead (SD receiver) or HDMI cable (HD receiver).
- Page 7 Power up and t uning : Switch on your TV and satellite receiver Using your TV remote control select the relevant HDMI, SCART or AV input (depending on the connection used) to view the receiver menu or select th e satellit e in put if using a TV with integrat ed r eceiver 3) You should now see a 'no signal' or 'bad signal' message...
- Page 8 Congratulations! the dish is now perfectly aligned! Troubleshooting If you do not hear any sound through the QuickSAT speaker make sure you have the batteries in the speaker the correct way round and that it is turned on, it sounds obvious but it is easy to get wrong.
- Page 9 Notes for use with SKY boxes The procedure when using a SKY receiver is broadly the same with a few things to note: Connect the F-type connector on the dual cable (Item C) from the satellite dish to the LNB input on your SKY box. You must ensure your SKY box has a channel list before use, if the box has not been used for a while it may have lost its channel list.
-
Page 10: End Of Life Disposal
1. In the European Union If the product is for business users and you want to discard it: Please contact your QuickSAT dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling.
Need help?
Do you have a question about the QS80 and is the answer not in the manual?
Questions and answers