Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Lascar EL-EnviroPad-TC
- Page 1 EL-EnviroPad-TC Quick Start Guide...
-
Page 2: Getting Started
Thank you for purchasing a Lascar Electronics EL-EnviroPad-TC. This device takes records temperature readings via an attached thermocouple, supplied with product. Other off-the-shelf probes can also be used if required. This quick start guide provides basic information to help you use your new product. - Page 3 Connecting the Thermocouple There is a thermocouple connector port at the top of the EL-EnviroPad-TC. Insert the thermocouple into this port. The device is configured to a K type probe. If you wish to use a J, N or T type probe select...
-
Page 4: Data Logging
Spot Check Measurement Select the button record and save temperature readings as and when required. Data Logging Select the button to record save temperature readings intervals. Full Set-Up includes selecting sample rate, setting alarms and when you want the device to start recording data. Quick Set-Up takes you straight to recording data. - Page 5 Select button temperature units, time, date and probe type. Transferring Data onto a PC Connect the EL-EnviroPad-TC to the PC via the USB cable provided. The PC will detect that the device has been connected. Locate the files from the ‘EL-EnviroPad-TC’...
- Page 6 Recharging The cable provided with the device is used data transfer recharging. EL-EnviroPad-TC will automatically start recharging once it is connected to a PC or USB mains adapter. Technical Support For technical support visit: www.lascarelectronics.com Issue 1L 09/2012...
Need help?
Do you have a question about the EL-EnviroPad-TC and is the answer not in the manual?
Questions and answers