Cable retainer
A cable retainer
allows you to adjust the length of the cable to your local requirements.
CAUTION – PROPERTY DAMAGE!
►
Ensure that you always guide the cable through the corresponding gap in
the rear of the base
NOTE
►
Always wrap the power cable around the cable retainer
direction. This reduces the length of the cable to a minimum, allowing you
to guide the cable through the gap in the base
Fig. 1
SWKD 2400 B2
is located on the base
for the sake of stability.
of the appliance. This winder
in a clockwise
(see fig. 1).
GB│IE│NI
7
■
│