Advertisement
5
LAG
BOLT
TAPERED
WASHERS
6
BOLT
CAP
NUT & WASHER
BOLT
CAP
WASHER
BOLT HEAD
7
INSTALL TOILET SEAT
Install toilet seat in accordance
with manufacturer's directions.
If inspection of this AS America, Inc. ("American Standard") plumbing product, within one year after its initial purchase, confirms that it is defective in materials or
workmanship, American Standard will repair or, at its option, exchange the product for a similar model.
This limited warranty applies only to the original purchaser and installation of these products. In the event of a limited warranty claim, proof of purchase will be
required—save sales receipt.
This limited warranty does not apply to local building code compliance. Since local building codes vary considerably, the purchaser of this product should check with a
local building or plumbing contractor to insure local code compliance
before installation.
This limited warranty is void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or
other damages; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped
by American Standard.
American Standard's option to repair or exchange the product under this limited warranty does not cover any labor or other costs of removal or installation. IN NO EVENT
WILL AMERICAN STANDARD BE LIABLE FOR THE COST OF REPAIR OR REPLACEMENT OF ANY INSTALLATION MATERIALS, INCLUDING BUT NOT LIMITED
TO, TILES, MARBLE, ETC. American Standard will not be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or
exchange of a defective product, all of which are expressly excluded from this limited warranty. This limited warranty does not cover any liability for consequential or
incidental damages, all of which are hereby expressly disclaimed, or the extension beyond the duration of this limited warranty of any implied limited warranties, including
those of merchantability or fitness for an intended purpose. (Some states or provinces do not allow the exclusion or limitation of implied limited warranties, so this
exclusion may not apply to you.)
This limited warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which case this limited
warranty does not affect such statutory rights.
In the United States:
American Standard Brands
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: (800) 442-1902
www.americanstandard.com
THIS WARRANTY IS NOT TRANSFERABLE FROM ORIGINAL CONSUMER PURCHASER.
73 01743- 10 0 Rev. B
FLANGE
BOLTS
FLANGE
CARE AND CLEANING
8
When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with
a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive
scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may
damage the seat's finish.
AS AMERICA, INC. ONE YEAR LIMITED WARRANTY
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: (800) 387-0369
www.americanstandard.ca
- 2 -
INSTALL TOILET ON FLANGE
a. Unplug wall waste opening and slide
toilet towards closet flange so bolts
project through mounting holes.
b. Loosely install retainer tapered washers
and nuts. Side of washers marked
"THIS SIDE UP" must face you!
INSTALL TOILET
a. Position toilet squarely to wall and, with a rocking
motion, push bowl against ring and flange.
Alternately tighten nuts until toilet is firmly anchored.
CAUTION: DO NOT OVERTIGHTEN NUTS
!
b. Insert the tapered washers (supplied in the kit)
into the lag bolts (not supplied). Insert bolts
through mounting holes and tighten into
pre-drilled floor openings.
c. Install the bolt caps on tapered washers. (If
necessary, cut wall bolt length to size before
installing caps.)
d. Smooth off the bead of sealant around base.
Remove excess sealant.
In Canada:
AS Canada, ULC
OR BASE MAY BE DAMAGED!
In Mexico:
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 01-800-839-1200
www.americanstandard.com.mx
Advertisement
