Install the M-600 Appliance in a 19” Equipment Rack..............30 Connect Power to an M-200 or M-600 Appliance........33 Connect AC Power to an M-200 or M-600 Appliance..............35 Service an M-200 or M-600 Appliance............37 Replace an M-200 or M-600 Drive..................... 39 Replace an M-200 or M-600 Appliance System Drive............39...
Before You Begin Read the following topics before you install or service a Palo Alto Networks next-generation ® firewall or appliance. The following topics apply to all Palo Alto Networks firewalls and appliances except where noted. > Tamper Proof Statement >...
™ mode, Panorama Log Collector mode, or PAN-DB Private Cloud mode. First Supported Software Release: Panorama 8.1 The following topics describe the hardware features of the M-200 and M-600 appliances. > M-200 Appliance Front Panel > M-200 Appliance Back Panel >...
Page 15
M-200 Appliance Front Panel The following image shows the front panel of the M-200 appliance and the table describes each front-panel component. Item Component Description System drive 240GB solid-state drive (SSD) used to store the operating system files and system logs.
Page 17
M-200 Appliance Back Panel The following image shows the back panel of the M-200 appliance and the table describes each back-panel component. Item Component Description Power supplies Use the AC power supply inputs to connect power to the appliance. The second power supply is for redundancy.
Page 24
M-200 and M-600 Appliance Port LEDs The following table describes how to interpret the status of port LEDs on M-200 and M-600 appliances. The only difference between the port LEDs on these appliances is that the M-600 appliance has two additional SFP+ port LEDs.
Install M-200 or M-600 Appliance in an Equipment Rack The M-200 and M-600 appliances ship with a four-post rack kit for installation in a 19” four- post equipment rack. > Install the M-200 Appliance in a 19” Equipment Rack > Install the M-600 Appliance in a 19” Equipment Rack...
Install the M-200 Appliance in a 19” Equipment Rack The following procedure describes how to install the M-200 appliance in a four-post equipment rack. The rack kit includes the hardware required to install the appliance in most equipment racks. Extra screws and washers are included.
Page 28
The inner-rail release clips are shown in step 1. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Install M-200 or M-600 Appliance in an Equipment Rack 2018 Palo Alto Networks, Inc.
Page 29
Secure the back rail to the rack using one M5 screw (with washer) for each rail. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Install M-200 or M-600 Appliance in an Equipment Rack 2018 Palo Alto Networks, Inc.
The following image shows the right side of the rack if you are facing the front of the rack. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Install M-200 or M-600 Appliance in an Equipment Rack 2018 Palo Alto Networks, Inc.
Page 31
The inner-rail release clips are shown in step 1. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Install M-200 or M-600 Appliance in an Equipment Rack 2018 Palo Alto Networks, Inc.
Page 32
STEP 4 | Secure the front of the appliance to the rack by turning the front thumb screws on each rail clockwise until tight. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Install M-200 or M-600 Appliance in an Equipment Rack...
Connect Power to an M-200 or M-600 Appliance M-200 and M-600 appliances have two AC power supplies (the second power supply is for redundancy). For details on power requirements and power consumption, see M-200 and M-600 Electrical Specifications. > Connect AC Power to an M-200 or M-600 Appliance...
Connect AC Power to an M-200 or M-600 Appliance The following procedure describes how to connect AC power to an M-200 or M-600 appliance. ® To avoid injury to yourself or damage to your Palo Alto Networks hardware or the data that Product Safety Warnings.
Page 36
M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Connect Power to an M-200 or M-600 Appliance...
Service an M-200 or M-600 Appliance The following topics describe how to replace serviceable components on an M-200 or M-600 appliance. For information on interpreting the front-panel and back-panel LEDs, see M-200 and M-600 Appliance Overview. > Replace an M-200 or M-600 Drive...
For assistance in verifying the status of the drive to determine if it should be replaced, contact Palo Alto Networks Support. The only difference between replacing an M-200 and M-600 appliance system drive is that the system drive on an M-200 appliance is located on the front panel of the appliance (see M-200 Appliance Front Panel)
Replace an M-200 or M-600 Appliance Log Drive The M-200 and M-600 appliance log drives are located on the front of the appliance. Each drive pair (A1 and A2 for example) is in an independent RAID 1 array. This redundant configuration helps ensure that there is no service interruption or loss of log data if a disk drive fails.
Replace an M-200 or M-600 Appliance Power Supply M-200 and M-600 appliances have two AC power supplies (the second power supply is for redundancy). If one power supply fails, you can replace it without service interruption as described in the following procedure.
Page 46
M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | Service an M-200 or M-600 Appliance...
M-200 and M-600 Appliance Specifications The following topics describe the M-200 and M-600 appliance hardware specifications. For feature, capacity, and performance information, refer to the Panorama Datasheet. ™ > M-200 and M-600 Physical Specifications > M-200 and M-600 Electrical Specifications >...
M-200 and M-600 Miscellaneous Specifications The following table describes M-200 and M-600 appliance miscellaneous specifications. Specification Value Mean time between failures (MTBF) • M-200 appliance—10 years • M-600 appliance—8 years M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | M-200 and M-600 Appliance Specifications...
Our products meet standards for product safety and electromagnetic compatibility when used for their intended purpose. To view compliance statements for the M-200 and M-600 appliances, see M-200 and M-600 Compliance Statements.
Translation: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take corrective actions. M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | M-200 and M-600 Appliance Hardware Compliance Statements 2018 Palo Alto Networks, Inc.
Page 56
M-200 AND M-600 APPLIANCE HARDWARE REFERENCE | M-200 and M-600 Appliance Hardware Compliance Statements...
Need help?
Do you have a question about the M-200 and is the answer not in the manual?
Questions and answers