Download
Share
Print this page
  1. Manuals
  2. Brands
  3. lubrizol Manuals
  4. Protection Device
  5. BlazeMaster
  6. Installation manual

lubrizol BlazeMaster Installation Manual

Fire protection systems
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
installation
best practices pocket guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the BlazeMaster and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for lubrizol BlazeMaster

  • Page 1 installation best practices pocket guide...
  • Page 2 Congratulations on choosing BlazeMaster Fire Sprinkler Systems, the world’s most specified nonmetallic fire sprinkler system. If you’ve used BlazeMaster Pipe & Fittings before, you know how easy it is to work with and install; if this is your first time using it, you’ll be pleasantly surprised at how light and flexible it is and how quickly it can be installed.

  • Page 3: Installation Best Practices

    INSTALLATION BEST PRACTICES Pipe and Fittings Storage and Handling ‣ Keep pipe and fittings in original packaging until needed. ‣ Avoid exposing pipe to direct sunlight for long periods of time. Cover pipe with opaque tarp if stored outside. ‣ Do not use pipe whose color has faded due to prolonged sunlight exposure.
  • Page 4 Solvent Cement Cold Weather Applications Store bulk quantities in location above 40°F (4°C). If solvent cement gels: ‣ Bring it into a warm environment (60°-90°F or 16°-32°C) and allow to sit for 24 hours. ‣ Do not artificially heat. ‣ Shake vigorously before use.

  • Page 5: Finishing Touches

    Finishing Touches ‣ Do not use Teflon tape and thread sealant simultaneously. ‣ Install sprinkler head after sprinkler head adapter has been solvent welded. Make sure the waterway is not obstructed. Then install the sprinkler head. ‣ Allow for movement due to expansion and contraction, particularly if installing in cold weather.
  • Page 6 CURE SCHEDULES Follow manufacturer’s recommended cure times prior to pressure testing. TABLE 1 225 psi (1552 kPa) Test Pressure (maximum) Ambient Temperature During Cure Period (Use this table for all cut-ins) 60°F to 120°F 40°F to 59° 0°F to 39°F PIPE SIZE (16°C to 49°C) (4°C to 15°C)

  • Page 7: Compatibility Notice

    TABLE 3 100 psi (690 kPa) Test Pressure (maximum) Ambient Temperature During Cure Period 60°F to 120°F 40°F to 59° 0°F to 39°F PIPE SIZE (16°C to 49°C) (4°C to 15°C) (-18°C to 4°C) ¾" (20 mm) 15 mins. 15 mins. 30 mins.
  • Page 8 Full-scale testing and end product performance are the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc.’s direct control.