Troubleshooting; Specifications - Sanyo SAC-MST6 Instruction Manual

Check before requesting service
Symptom
Coffee/Tea is not brewing
Grinding does not start
Coffee/Tea overflows
Black fiber floats in coffee/tea
Oil floats in coffee/tea
Brewing is very slow
If above troubleshooting did not solve problems, please stop using and contact
a qualified service person.

SPECIFICATIONS

Power Source 120V 60Hz
Power
850W
Consumption
Dimensions
11
(w x d x h)
Weight 5.3 lbs.
Measuring Spoon,
Accessories Cleaning Brush,
Paper Filter (3 filters)

TROUBLESHOOTING

3 ⁄ " 13 ⁄ " 7 ⁄ "
x 5 x 10
16 16 8
12
Possible Remedy
• Was power cord plugged in properly?
• Was water tank attached to the
base properly?
• Was the switch in the "On/Keep
Warm" position, not "Off/Grind"?
• Was the switch in the "Off/Grind", not
"On/Keep Warm"?
• Were grinder lid and grinder case
set properly?
• Was paper filter placed properly?
• Was it folded properly?
• Was more than "Cups 6" water added?
• Were more than 6 measuring spoons
of coffee grounds used?
• Was coffee ground too fine?
• Was charcoal filter washed well
prior to use? Wash again.
• Coffee beans contain oil but are not
harmful to consume.
• A residue in water is clogging inside pipe.
Follow special cleaning instructions.
Power
Consumption
Max. Water
Capacity
Power
Consumption
Max. Capacity
850W
27.4 oz.
140W
1.62 oz.