Sending A Text Message; Service Features; Call Waiting; Call Forwarding - Sanyo SCP200 User Manual

Sending a Text Message

1.
Press to access the main menu.
2. Select Messaging and press
3. Select Send Text and press
4. Select Phone Book Entry and press
5.
Select a recipient using your navigation key and press
(This will check the box next to the recipient's name.)
– or –
To add someone not already in your Contacts list, select
<Add Entry> and press
mobile phone number or email address and press
Save (left softkey) to save the entry.
6. Press Done (left softkey) when you are finished
selecting/entering recipients (you may include up to
10 recipients) and press Next (left softkey).
7.
To enter a message using your keypad, highlight the box
under Message and press
press Mode [right softkey] to select a message from
Preset Messages or Recent Messages), and press
OK (left softkey).
8. To set priority, select the box under Priority and press
9. Select Ordinary or Urgent and press
10. Press Send (left softkey) to send the message.
Note: For additional messaging options, please see your phone's
online User's Guide at www.sanyowireless.com.
22
.
.
.
. Enter the new recipient's
, enter your message (or
.

Service Features

Call Waiting

To respond to an incoming call while you're on a call:
Put your first call on hold and answer the second call by
pressing
.
again.)

Call Forwarding

Call Forwarding lets you forward your calls to another
number. You can still make calls from your phone while this
is activated. There is a per-call charge for this service.
To activate:
1.
Press
2.
Enter the area code and phone number to which your
calls should be forwarded.
3.
Press
activation of Call Forwarding.)
To deactivate:
.
1.
Press
2.
Press
deactivation.)
. (To switch between calls, press
.
. (You will hear a tone confirming the
.
. (You will hear a tone confirming the
23