Using Your Phone's Tools; Using The Alarm Clock - Sanyo SCP-7050 User Manual

Using Your Phone's Tools

Using the Alarm Clock

To set the alarm clock:
1. Select
Note:
To set the alarm clock in a no-service area, press
in the "Set Current Time/Date" screen.
2. Select a number and press
3. Select the items you want to edit and press
Description to enter a description of the alarm.
Time to enter the alarm time. Enter the desired alarm time
and press
Repeat to select the alarm frequency.
Alarm to set the alarm on or off.
4. Press
Save
Tip:
Press the left softkey (
To change the alarm settings, select
the ringer length and snooze options.
Note:
Alarm will not sound when the phone is powered off. However,
depending on the Power On to Alert setting, the alarm setting will be
active even if the phone is turned off. (See "Setting Power On to Alert"
on page 47.)
To stop the alarm:
Press any key to stop the alarm. (The alarm will stop and then
sound again after the selected snooze interval.)
Press and hold the
Press
Dismiss
> Tools > Alarm Clock.
.
(left softkey) to save the alarm settings.
On
or
to cancel snoozing.
(right softkey) to dismiss the alarm.
.
Off
) to toggle the alarm on and off.
Settings
(left softkey)
OK
.
(right softkey) to set
77