Advertisement
Repairs
FSC Timber
For light damage, please see section on specific maintenance details above. For instances of heavy damage,
the timber item should be replaced. Please order against the part number reference in the reordering section
towards the end of this manual.
Stainless Steel
Light damage (surface scratches etc.) can be removed using an emery pad (240 grit) and freeing oil such as
'WD40'. Care should be taken to follow the direction of the brushing grain. It is recommended that a trial repair
be carried out on an unimportant surface first. No corrosive cleaners or other abrasives should be used. Any
contamination, particularly carbon steel scuffs from vehicles, should be quickly removed to avoid corrosion.
Galvanised Surfaces
For light damage to hot dipped galvanised finishes repair using a high performance cold galvanising zinc spray
(70% zinc or above). Spray application should be carried out in accordance with approved methods detailed by
the product manufacturer. Please note that it is advisable to use professional painters to achieve best results
when touching up larger areas.
Heavy Damage
In the event of serious damage to any component, replacements should be ordered from Factory Furniture Ltd.
In this event (or if the product needs to be disassembled for any reason), please contact Factory Furniture for
detailed technical advice.
Reordering / Spares
Part No.
Item Description
P1013 / 01
1 no. Circular tree guard timber ring set (two halves in total)
P1013 / 02
1 no. Circular tree guard frame half - 2 required for complete frame (inc. upper & lower ring plates)
P1013 / 03
2 no. Joining plates
P1013 / 04
1 no. Circular tree guard grille half - two required for complete grille (includes grille ring plate)
Instructions For Reordering
If possible, please specify job name or number at the time of reordering to enable identification of details such
as the original species of timber used, stainless steel finishes and polyester powder coat colours etc. In any
event where either, additional orders are required, or spares and replacements are required please contact
Factory Furniture Ltd. Using the part numbers given above as reference should help us to process your enquiry
more efficiently.
Note - All fittings required to assemble ordered parts will automatically be included in the order.
AutoCAD Drawing List
FF1013 / 01
CIRCULAR TREE GUARD & GRILLE
FF1013 / 02
CIRCULAR TREE GUARD & GRILLE
Contacts
Factory Furniture Ltd
5 Pioneer Road
Faringdon, Oxon
SN7 7BU
UK
Tel
+44 (0) 1367 242731
Email hello@factoryfurniture.co.uk
Web
www.factoryfurniture.co.uk
CIRCULAR TREE GUARD & GRILLE repairs
FABRICATION DRAWINGS
STEEL PART DETAILS
3
Advertisement
