Advertisement
TrekStep™ – Installation Instructions
Operation
•
The TrekStep™ is foot operated and deploys and retracts with a
nudge of your foot.
•
To deploy, press down using your left foot, on the forward outside
corner of the step pad.
•
To retract, gently kick the underside of the step pad.
•
Max Load Capacity: 300 lbs.
•
Always use appropriate hand holds when stepping up to or down
from your truck's cargo bed.
BESTOP SIDE STEPS
Maintenance Tips
The step pad surface and linkage arms can be washed with mild soap and
water using a soft brush or sponge to dislodge any mud, dirt or accumulated
road grime. Rinse with fresh water.
To prevent slipping, avoid applying waxes, lubricants or protectants like Armor
All® to the step surface.
Attention!
TrekStep™ SHOULD ALWAYS BE STOWED IN THE RETRACTED
POSITION WHEN DRIVING.
RUNNING BOARDS
Advertisement
