Connecting The Usb Option - Planar Clarity Matrix User Manual

Connecting the USB Option

The Fiber Video Extension also incorporates an embedded USB extension in the fiber
optic cable, eliminating the need for a third party USB extension when using
Clarity® Matrix™ MultiTouch interactive LCD video wall displays and other USB
devices at the video wall. The LCD modules can also provide power for Clarity Matrix
MultiTouch, eliminating the need for separate AC power connection at the video
wall.
Follow these steps to set up the USB option.
© 2015 Planar
1
Connect the touch sensor USB cable to a LCD Panel Interface Board that is
connected to LCD 1 on the Fiber Video Extension module.
2
Use the power adapter cable to connect all points of power on the touch
sensor to the 5V Aux port on any convenient LCD Panel Interface Board.
3
Connect the touch control PC to the Fiber Video Extension module that is
connected to the LCD Panel Interface Board in step 1.
Clarity Matrix Fiber Video Extension User Guide
Connecting the USB Option
10