Cover Plate - Sanyo LNS-T03 Replacement /Installation Instructions

LENS REPLACEMENT AND INSTALLATION PROCEDURE
1
Remove 2 Screws A and Remove Lower Lens
Cover. Push part B and pull the Lower Lens
Cover down and remove it. (See Fig. 1.)
2
Remove 4 Screws C. Pull the Upper Lens Cover
toward front and remove it. (See Fig. 2.)
3
Remove 2 Screws D and Cover Plate from the
back of the Upper Lens Cover. (See Fig. 3.)
A
UPPER LENS
COVER

COVER PLATE

-2-
{Type (1) Cabinet}
B
LOWER LENS
COVER
C
C
UPPER LENS
COVER
Fig-1
Fig-2
D
Fig-3