CA Traffic Clever SID User Manual

Start Collect and connect the Palm to the SID using the cable provided.
Tap Setup to enter the setup screen.
Any data on the SID must be collected before entering the set-up menu.
The options available in the set-up screen will vary depending on the configuration selected.
The configurations available for the SID, and any additional options, are explained overleaf.
IN001v1
Clever SID
User Guide
The main screen shows the following information:
Site
Dump File
Main
Firmware
Period
Config
Start
End
Pilot
To Collect the data from the SID, tap Collect.
The Speed Limit can be set either by tapping on the dot-
ted line and writing on the graffiti pad, or by tapping on one
of the shortcut icons.
The Max Display Speed is the speed above the Speed
Limit beyond which the SID will display bars and no speed
information. It can be set in the same way as the Speed
Limit.
The Site Number can be set in the same way as the
Speed Limit. Changing the Site Number will not affect
Collected data.
If Synchronise Time & Date is ticked, the time on the SID
will be set to that of the Palm.
Site Number
Name of dmp file to be created
upon Collection
Main battery level
Firmware version
Survey binning interval
Current survey configuration
Start Time/Date of survey
End Time/Date of survey
Time on Palm handheld
Page 1 of 2