Mobotix AudioMount Quick Install

AudioMount: Quick Install
• Easy installation using adhesive film
• Integrated speaker and microphone
• Suitable for all FlexMount mono cameras
The AudioMount is a mounting adapter for the S14M and S15M cameras allowing attachment to thin and
smooth surfaces (e.g., stainless steel plate, mailbox, etc.) using an adhesive film on the backside of the
AudioMount. Speaker and microphone are included so that the AudioMount can provide full intercom
functionality. Using the appropriate MOBOTIX accessories, you can also use the FlexMount camera in
conjunction with the AudioMount as a hemispheric door station (door station function with firmware 4.1.9
and higher).
Delivered Parts
1.8
1.7
1.6
Installation of the AudioMount
1. Choose installation site
The AudioMount can be mounted horizontally or
vertically to (stainless) steel sheets with a thickness
of 1,2 mm to 3,0 mm.
2. Prepare mount surface
Drill holes for the lens, the microphone and the
speaker using the mount template sheet (item 1.9).
For alignment of the mount, mark the position of
the four notches (see a) on the side of the mount
surface where the mount is to be glued to.
3. Affix AudioMount
Remove the red protection film completely and
position the AudioMount concentrically to the
drilling in the panel with use of the centering
aid. Align horizontally or vertically by means of the
four notches (a) and then press the AudioMount
onto the panel. Break off the four pegs by pushing
them inwards (b).
Notes: Recommended working temp. 15 to 20 °C
(59 to 68 °F). The surface has to be clean, fat-free
and dry. Press hard when attaching the mount
(the glue is activated by pressure!)
Installation of the Camera
1. Temporarily attach camera
To make the cable connection easy, temporarily
attach the camera upside down onto the AudioMount
with the two Allen screws (item 1.6).
2. Attach connection cables
Open the camera housing with a 2,5 mm Allen
wrench (provided with the camera). Connect the
required cables:
• Lead the AudioMount´s microphone and speaker
cables as well as the MxBus cables (when
using MxBus modules) through the camera
opening for additional cables and connect
them (see S15 Camera Manual, Chapter 2).
• Insert the patch cable into the left opening of
the camera and secure it with the blue bayonet
catch (see S15 Camera Manual, Chapter 2).
MOBOTIX AG • D-67722 Langmeil • Tel: +49 6302 9816-0 • Fax: +49 6302 9816-190 • www.mobotix.com
1.1
1.2
1.3
1.4
1.5
The HiRes Video Company
Audio Extension for
FlexMount Cameras
Example: metall sheet not included in delievered parts
Item Number Part Name
1.1 1
1.2 1
1.3 4
1.4 5
1.5 5
1.6 4
1.7 1
1.8 1
1.9 1
a)
AudioMount
Black front cover with dome
Metal washer
Blue washer
Red washer
Allen screw M5x20
Allen wrench
Cable tie
Mount template sheet (no ill.)
b)
Micro Spk. MxBus