Remington HC9700 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
Ultimate Performance Hair Clipper
When using an electrical appliance, basic precautions should always be observed,
including the following; read all instructions before using this appliance.
DANGER
HC9700
To reduce the risk of electric shock:
Use and Care Guide
• Do not use in area that can be dropped into a sink or bath.
• Make sure the charging stand, power adapter, and cord do not get wet. Do not
plug or unplug the appliance with wet hands.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not use while bathing or in the shower.
• Do not place or store this appliance where it can fall or be pulled into a tub
or sink.
• Except when charging, always unplug this appliance from the electrical outlet
immediately after using.
• Unplug this applian ce before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
• This appliance is for household use only.
• An appliance should never be left unattended when it's plugged in, except
when charging a rechargeable appliance.
• Close supervision is necessary when this appliance is used by, on, or near
children or persons with special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended by the manufacturer.
• Keep the cord away from heated surfaces.
• Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been dropped
Register Your New Product Today!
into water.
By registering your new Remington ® product, you will receive these important benefits: • Never drop or insert any object into any of the appliance's openings.
Proof of Ownership • Product Protection • Product Registration • Special Offers
• Do not use outdoors or operate where aerosol (spray) products are being used,
Register online at: RemingtonProducts.com
or where oxygen is being administered.
• Make sure the cord is disconnected from the clipper while storing this appli- Product Features
ance and cord in a moisture-free area. Do not store it in temperatures exceed-
ing 140°F (60°C).
Remington hair clippers provide a quick and easy way to create
®
• Do not use this appliance with a damaged or broken cutter unit, as injury may
professional-looking haircuts. Developed to combine professional grade blades with
occur. Always make sure blades are aligned properly. premium guide combs, this hair clipper enables you to achieve customized, modern
• Always attach plug to appliance and then the adapter to the outlet. To discon- looks and traditional hairstyles. To help you create those styles, and to extend the
life of your hair clipper, please read all instructions before using.
nect, turn all controls to OFF, then remove adapter from outlet, then detach
power cord from the dipper for storage.
• Do not use an extension cord or a voltage converter with this appliance.
• Do not wrap the cord around the appliance.
3
• Dispose of batteries properly. Do not incinerate. Batteries may explode if
overheated. Do not wrap in metal or aluminum foil. Wrap in newspaper before
discarding. It is suggested that you contact local battery redemption site(s) in
your area.
2
SAVE THESE INSTRUCTIONS
1
1 On/off switch
2 Taper lever
3 Blade set
4 Left and right ear guide combs
5 9 guide combs (1.5mm–25mm)
6 Charging stand
Charging Your Appliance
Note: Charge your appliance for a full 4 hours before using for the first time.
• Please refer to the charge times shown in this book.
• Ensure the product is switched off.
• The adaptor automatically adjusts to a main voltage between 100V and 240V.
• Connect the product to the adaptor and then to the power outlet.
CHARGING VIA CHARGING STAND
4
• Connect the adaptor to the charge stand and then to the power outlet.
• Place the charge stand on a flat surface.
• To charge the clipper without the charge stand connect the adaptor to the
5
power port at the base of the product and then to the power outlet.
CHARGE LEVEL INDICATORS DURING CHARGING
Charge Level Indicator
Charging Red LED will blink slowly
Low Battery Red LED will blink fast
Fully Charged Red LED will stay solid
(when plugged in)
6 • Run time from fully charged is 150 mins.
• Charge time from empty is 4 hours.
Note: This product can be used corded or cordless.
8 Note: To preserve the life of your batteries, let them run out every 6 months then
7 fully charge.
Note: When the battery is becoming depleted, the low battery indicator will flash.
QUICK CHARGE FUNCTION (TYPICAL EXPECTED RUN TIME)
Charge Run Time
5 minutes 2.5 minutes
10 minutes 5 minutes
7 Charge/low battery indicator
8 Oil bottle
30 minutes 15 minutes
9 Adaptor (not shown)
10 Hex wrench (not shown) 60 minutes 30 minutes
11 Angled cleaning brush (not shown)
120 minutes 60 minutes
12 Blade release button (not shown)
How to Use
• For corded use connect the product to the adaptor, then to the power outlet. TAPER LEVER
• Extended corded only use will result in a reduction of battery life. • The taper lever settings can be seen on the table below.
• Cordless use – when the product is switched on and fully charged it can • Setting one gives you the length indicated on the fixed comb you are using.
be used in cordless mode for up to 150 minutes.
• Using the taper lever will increase this length correspondingly.
• Switch the product on by sliding up the on/off switch.
Setting
BEFORE STARTING THE CUT
1
• Inspect the clipper making sure that it is free from hair and dirt.
• Seat the person so that their head is approximately at your eye level. 2
• Before cutting, always comb the hair so it is tangle free and dry.
3
• 1mm length is achieved without any combs. Holding the blades perpendicular
to the skin will trim to 0.5mm at the lowest taper lever setting.
4
5
Guide Comb Grade/Cut Length
TO ATTACH AND REMOVE A COMB
0 #0, 1.5mm
• Make sure the blade is locked into place.
• Install the desired comb attachment on the blade, it will latch into place.
1 #1, 3mm
• To remove, pull the removal tab first to release the latch and pull away.
2 #2, 6mm
INSTRUCTIONS FOR CUTTING HAIR
3 #3, 9mm
• For even cutting, allow the comb attachment/blade to cut its way through the
hair. Do not force it through quickly. If you are cutting for the first time, start
4 #4, 12mm
with the maximum comb attachment.
5 #5, 16mm
STEP 1 – Nape of the neck
6 #6, 19mm
• Attach the 3mm or 6mm guide comb.
• Hold the clipper with the blade teeth pointing upwards. Begin starting at the
7 #7, 22mm
centre of the head at the base of the neck.
8 #8, 25mm • Slowly lift the clipper, working upwards and outwards through the hair,
trimming just a little at a time.
STEP 2 – Back of the head
• With the 12mm or 19mm guide comb on the clipper, cut the hair at the back of
the head.
STEP 3 – Side of the head
• With the 3mm or 6mm guide comb on the clipper, trim sideburns.
• Then change to the longer 9mm guide comb and continue to cut the top of the head.
Cut length
1.0mm
1.15mm
1.3mm
1.45mm
1.6mm